Tetrix Max Structure Pack

Tetrix Max Servo Extension gives your servo a little more room to roam with this extension.

TETRIX MAX Pivot Bearing is a replacement pivot bearing for all TETRIX pivot arms and brackets.

• Size: 3 mm

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

Tetrix Max Servo Y Connector connects two servos to one channel.

This 20 Amp fuse is used in FIRST Tech Challenge batteries and the FIRST Robotics Competition Power Distribution Panel (am-2856).

Specifications:

• Color: Yellow
• Amps: 20
• Max Voltage: 32
• Style: MINI®
• Specification: SAE J2077
• Type: Blade Fuse

The Motor Power Cable features Anderson Powerpole Connectors and attaches the 12-volt DC motor to their power source. The cable is 18" in length and is used to connect the motors to the TETRIX PRIZM Robotics Controller (43000).

Tetrix Max Hex Key Pack comes with all four sizes of Hex Keys needed for TETRIX hex pieces. Includes one each of 7/64", 3/32", 1/16", and 5/64" keys.

Designed to use with TETRIX PRIZM Robotics Controller, this motor controller connects to the PRIZM expansion port, enabling users to control up to six additional servo motors and two additional continuous rotation servo motors. Up to four motor controllers can be connected to the PRIZM expansion port. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO EV3 Brick. Software blocks can be downloaded from the Resources tab below.

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)