Close
Main Categories
    Filters
    Preferences
    Search

    4 Gauge Robot Side Red Power Cable

    This four gauge power cable is used to connect a 120 Amp Breaker (am-0282) to a Power Distribution Panel (am-2856). This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool. 

    Specifications:

    • Gauge: 4
    • Weight: 0.1 Pounds
    • Overall Length: 5 in. (+/- 0.25 in.)
    • Wire Length Lug to Lug: ~4 in. (+/- 0.25 in.)
    MFR Part #: am-3852
    $15.38
    Availability: In stock

     

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    Customers who bought this item also bought

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (255 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    CAN Bus Wire 25ft

    #am-3071a
    $19.00
    (17 In stock)

    This is a 25 foot section of a twisted pair of 22 AWG wire.

     

    Specifications

    • Gauge: 22 AWG
    • Length: 25 feet

    Pigeon 2.0

    #am-3556a
    $355.00
    (0 In stock)

    Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. The gyro has built-in temperature compensation. Pigeon provides a heading by sensor fusing all 9 measurements. It can be connected to the Talon SRX for power and communication via UART, or it can be wired to the CAN bus while powered from a separate 12V source. Pigeon has built-in compass compensation for hard-iron, soft-iron, and physical tilt. The Pigeon 2.0 eliminates the need for on-boot calibration and temperature calibration and does not require stillness upon boot-up.