4" Compliant Wheel, 3/8" Hex Bore, 35A Durometer, Green

Churro has proven itself over years of robot market use as a lightweight and versatile extruded aluminum hex profile, great for standoffs, supports, and low load shafts. Churro Lite offers the same great features of Churro now in a 3/8 in. profile. The outside of this extrusion is between 0.368 in. and 0.374 in. hex (with small weight-saving grooves) to fit inside all our 3/8 hex bore products. The center hole is sized to fit a 10-24 thread forming screw. No tapping or threading is needed, as long as a thread forming screw is used. 

Specifications:

• Material: 6061-T6 Aluminum
• Inside Diameter: 0.163 in. - 0.170 in.
• Outside Width: 0.368 in. - 0.374 in.
• Length: Selectable Above
• Weight: 0.09 Pounds per Foot

Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

Specifications:

• Material: 6005A Aluminum
• Inside diameter: 0.231 in.
• Outside width: 0.495 in. Hex, across flats
• Length: Selectable Above
• Weight: 0.16 lbs/ft

This chain is designed to hold wires in check while attached to a moving object. They are particularly useful for controlling a manipulator on the end of an arm or elevator. 

This chain is designed to hold wires in check while attached to a moving object. They are particularly useful for controlling a manipulator on the end of an arm or elevator. 

Options:

• Mounting brackets
  • Sold in qty 2
  • 4 mounting holes, 0.13 in. countersunk
  • One piece easy install

The 57 Sport is a competition tested high performance line of planetary gearboxes from AndyMark and BaneBots. The 57 Sport features numerous improvements over previous planetary gearboxes used on FIRST Robotics Competition robots. 

This updated version of the AndyMark 775 RedLine Motor is an even faster and more powerful version of this popular 775-class motor platform. With a power rating of up to 363W, this motor is capable of delivering even more immense power in the same small lightweight package over the previous version. This ball-bearing supported, air cooled motor is best used in high-speed applications where the motor will not be stalled for long periods such as shooters, conveyors, and intake mechanisms. With sufficient care and attention to your application's traction limit, this motor can be effective in FRC drive applications as well.

This variation of the RedLine comes with a 16 tooth, 0.7 Module pinion and mounting screws (am-3768) already installed allowing this motor to be installed into either a 57 Sport or a Dual 775 Sport gearbox. Not only does this take the risk of damaging the motor during pinion installation out of your hands, it also means that this counts as a COTS part in FRC.

Be sure all your threaded pneumatic connections are sealed properly with this teflon tape. Standard grade PTFE tape used in all your robot pneumatics.

Specifications:

• Width: 1/2"
• Length: 520"
• Material: PTFE

1/2 in. hex shaft is the life of many competitive robot components. This 1018 steel shaft is available in four lengths. The five inch shaft was used in various Modulox gearboxes and may come with a 1/4 in. hole drilled in one end. The other sizes can be used as shaft stock, ready to be cut to length as needed. The stock lengths ship un-plated ready for your choice of finish. 

Specifications

• Diameter: 0.5 in. Hex
• Finish: None
• Length: 5 in.
• Material: 1018 Steel
• Weight: 0.74 lbs per ft