Bearings & Bushings
Acetal Bearings provide extra support when building mechanisms interact with heavy-duty loads.
Product Overview:
Specifications:
This nub can be used to support the end of a 6mm D shaft, and be bolted to an
S3 rail, a Ninja sprocket, pulley or wheel. With this you could create an idler
sprocket, free spinning wheel or wheels on dead axles. This Nub also works as a
bearing mount for a spinning axle.
Specifications:
Product Overview:
This robust bearing is used on the Swerve & Steer Module.
Specifications:
The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.
Material: bronze
Inside Diameter: 6 mm
Outside Diameter: 14 mm
This is the bronze bushing (and spacer!) used in the Worm Gearbox (am-0917).
Specifications:
The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.
3/8" Hex Bore, Shielded, Flanged Ball Bearing with Large (1.125") Outside Diameter
Specifications:
Each hub now has a "flower" pattern that fits and keys into the 42T 5mm HTD Pulley.
This self-lubricated bearing is used as bushings for the Rubber Rollers on the 6" Mecanum SR Wheels and 8" Mecanum HD Wheels.
Specifications:
This bracket is a main structural component of the 2x1 Single Stage Elevator Bearing Kit (am-3779). This plate mounts to a carriage and a Large Bearing Plate to hold bearings, translating the load from the carriage to the uprights in a lift system.
Specifications:
These 4 mm long bronze bushings are handy for tighter space requirements.
TETRIX MAX Bronze Bushings are greased to reduce friction.
These plastic spacer/bushings are used in conjunction with 6 mm axles to keep your mechanisms and wheels running smoothly. Can also be used as a 2 mm spacer between metal surfaces.