The FTC Drive Base Kit is available for FIRST teams only.
Note: You can use any FIRST legal motor with this set.
The Shanghai Accessory Kit includes the following items. Many of the parts are already included in the Shanghai Collection, however some, highlighted in blue text, are not.
|1||Mecanum Wheel Set (2 left, 2 right, 100mm, w/6mm Hub)||76240|
|2||Rack & Pinion Set (1 Rack, 1 Pinion, 2 Glides)||76170|
|1||Linear Slide Kit, 250mm Slide and Block||72064|
|4||30 Tooth Bevel Gear 1 to 1 (2 Pack)||76219-2|
|1||Flange Bearing 6mm ID, 14mm OD, 15mm Flange (12 pack)||76302-12|
|1||Collar 6mm ID D-Shaft, 12mm OD (6 pack)||76304-6|
|1||Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)||76305-24|
|1||Shaft Spacer Plastic 6mm ID x 10mm OD x 5mm L (12 pack)||76307-12|
|1||M3 x 12mm Socket Head Cap Screw (pack of 100)||76202-100|
|1||M3 x 10mm Button Head Cap Screw (pack of 50)||76203-50|
|1||M3 Kep Nut (pack of 100)||76204-100|
|1||48mm Standoff (12 pack)||76181-12|
|2||Servo Mount Flat Plate||76145|
|2||Servo Mount Offset Plate||76146|
|2||Servo Horn 25T||76148|
|2||6mm D-Shaft Servo Hub 25T||76149|
|1||96mm Adjustable Flat Bracket (2 pack)||76083-2|
|1||L Bracket (2 pack)||76087-2|
|1||Inside L Bracket (2 pack)||76089-2|
|1||144mm x 40mm Flat Bracket (2 pack)||76064-2|
|1||96mm Flat Beam (2 pack)||76047-2|
|2||96mm Square Beam||76107|
|2||Multi-Mode Smart Servo||75002|
|1||IR Range Sensor (10 cm to 80 cm)||40117|
|1||IR Range Sensor Bracket||40118|
The Skills Canada Mobile Robotics Collectionis the official collection for the Skills Canada Mobile Robotics Competition.
The set includes the TETRIX PRIZM® Robotics Controller, TETRIX Tele-Op Control Module, and PS4 DUALSHOCK 4 controller, providing teams limitless programmable remote-control execution. Program the PS4 controller to complete actions or a sequence of actions at the touch of a button. Control speed with the swipe of the finger. With the PRIZM controller and Tele-Op module, there are infinite opportunities for behaviors and movements at your fingertips.
The Skills Canada Mobile Robotics Collection has over 702 Structural component and hardware elements parts including anodised aluminum channel, brackets, clamps, shaft hubs, steel axles, gears, bar beams, spacers, bushings, set collars, anchor blocks, couplers, rack and pinion elements, 2 x 12 volt DC Motors with encoders, 1 x continuous servo Motor, 2 x standard servo motor, optical encoders, mounting brackets, bearings, 4 Wheels, axle couplers, bushings, sprockets, shaft hubs and chain, and a vast assortment of fasteners, socket head screws, button head screws, Lock nuts etc.
TETRIX® PRIZM™ features:
New for the 2022-2023 Season
Download the Kit List here.
FTC Teams are eligible to get 1 kit at a heavily discounted price. To apply for the discount please fill out this application form.
The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).
The WorldSkills Mobile Robotics 2021 Junior Collection by Studica is the authorized collection for the WorldSkills Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.
The WorldSkills Mobile Robotics VMX/Titan Workshop Kit is used in the classroom for teaching, testing and doing research in mobile robotics. It includes each the essential components and is referenced in the WorldSkills Mobile Robotics Shanghai 2022 training material.
The FTC Drive Base Kit v2 (70400-v2) is available for FIRST teams only and is fully FIRST legal. This is an upgrade from our first version (part # 70400). It includes our new slim mecanum wheels with bearings on all rollers, allowing you to make a wider base robot. It also has 4 NeveRest Orbital 20 Gearmotors with wires, our new Clamping Shaft Hubs, 4 bumpers and more hardware.
From Competition to Classroom, the Studica Robotics Classroom Kit is ideal for classroom Robotics programs. This kit will allow for instruction on Robotics Design, CAD, Prototyping, Building, and Programming. Reach more students with important Curriculum Correlations to Coding, Manufacturing, Tech Design, and Engineering while teaching robotics in the classroom with the Studica Robotics Classroom Kit.
The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot. The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment. Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them!
This affordable solution is intended for:
The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Advanced Robotics Controller which can be programmed in C++ and Java. VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).