Coral USB Accelerator

Tube plugs are a great way to interface 1x1 and 2x1 box tube with other surfaces. They are especially good when clearance is an issue and gussets aren't an option. To use, drill a hole in the box tube, line the threaded portion of the Tube Plug up with the hole, and insert your fastener. 

These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer genuine Gates brand belts, AndyMark branded belts, as well as lower-cost generic brand belts.

Current Belt Offerings

Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

AndyMark Brand Belts

• 30T - 150-HTD-5M-9 - am-5209_30T
• 35T - 175-HTD-5M-9 - am-5209_35T
• 40T - 200-HTD-5M-9 - am-5209_40T
• 45T - 225-HTD-5M-9 - am-5209_45T
• 50T - 250-HTD-5M-9 - am-5209_50T
• 55T - 275-HTD-5M-9 - am-5209_55T
• 60T - 300-HTD-5M-9 - am-5209_60T
• 64T - 320-HTD-5M-9 - am-5209_64T
• 65T - 325-HTD-5M-9 - am-5209_65T
• 70T - 350-HTD-5M-9 - am-5209_70T
• 75T - 375-HTD-5M-9 - am-5209_75T
• 80T - 400-HTD-5M-9 - am-5209_80T
• 85T - 425-HTD-5M-9 - am-5209_85T
• 90T - 450-HTD-5M-9 - am-5209_90T
• 91T - 455-HTD-5M-9 - am-5209_91T
• 93T - 465-HTD-5M-9 - am-5209_93T
• 95T - 475-HTD-5M-9 - am-5209_95T
• 100T - 500-HTD-5M-9 - am-5209_100T
• 105T - 525-HTD-5M-9 - am-5209_105T
• 106T - 530-HTD-5M-9 - am-5209_106T
• 110T - 550-HTD-5M-9 - am-5209_110T
• 115T - 575-HTD-5M-9 - am-5209_115T
• 120T - 600-HTD-5M-9 - am-5209_120T
• 121T - 605-HTD-5M-9 - am-5209_121T
• 125T - 625-HTD-5M-9 - am-5209_125T
• 130T - 650-HTD-5M-9 - am-5209_130T
• 135T - 675-HTD-5M-9 - am-5209_135T
• 136T - 680-HTD-5M-9 - am-5209_136T
• 140T - 700-HTD-5M-9 - am-5209_140T
• 145T - 725-HTD-5M-9 - am-5209_145T
• 150T - 750-HTD-5M-9 - am-5209_150T
• 152T - 760-HTD-5M-9 - am-5209_152T
• 160T - 800-HTD-5M-9 - am-5209_160T
• 167T - 835-HTD-5M-9 - am-5209_167T
• 170T - 850-HTD-5M-9 - am-5209_170T
• 180T - 900-HTD-5M-9 - am-5209_180T
• 190T - 950-HTD-5M-9 - am-5209_190T
• 200T - 1000-HTD-5M-9 - am-5209_200T
• 225T - 1125-HTD-5M-9 - am-5209_225T
• 250T - 1250-HTD-5M-9 - am-5209_250T

Specifications:

• Pitch: 5 mm
• Length:
• Width: 9 mm
• Number of Teeth: 48
• Weight: 0.05 Pounds

Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

Specifications:

• Material: 6005A Aluminum
• Inside diameter: 0.231 in.
• Outside width: 0.495 in. Hex, across flats
• Length: Selectable Above
• Weight: 0.16 lbs/ft

Tired of hex clamp collars that cost an arm and a leg? Tired of stripping out the set screw on your clamp collar? Need to add a collar in an assembly and don't want to remove everything from your hex shaft?

Me too! I've ran into all of the above scenarios multiple times building multiple robots. These collars are the holy grail -

• split so they can easily be added or removed
• lightweight 6061 aluminum
• .5 oz (.031 lbs) for one hex collar
• uses two 8-32 socket head cap screws that require a 9/64" allen wrench
• $4.00 per collar, sold in 5 packs
• anodized black for awesomeness

General Dimensions:

• When clamped on 1/2 inch hex shaft - approx 1.2 inch outer diameter
• 0.40 inches wide
• STEP file CAD Model Available

BLUE Cordura nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

Additional Information:
 

We also have stick-on numbers available (not included with material).

Specifications

• Color: Blue
• Denier: 1000
• Length: 161 in.
• Material: Nylon
• Width: 19.5 in.

Note: Setup directions for this radio can be found here, http://wpilib.screenstepslive.com/s/4485/m/13503/l/144986?data-resolve-url=true&data-manual-id=13503.

Product Overview: 
Announced as the 2017 Radio for the FIRST Robotics Competition: http://www.firstinspires.org/robotics/frc/blog/2017-control-system-update To comply with new FCC (USA) and IC (Canada) regulations, this device does not allow non-Open Mesh firmware to be loaded, and no SSH access within the US or Canada. It also requires a new approval process for custom.sh files
This radio will ship with default firmware and is only allowed to be used with Open Mesh firmware and FIRST Robotics Competition approved firmware.

Compact size perfect for robot applications where WiFi is needed, including in the FIRST Robotics Competition environment. High speed, dual band 1.17 Gbps (300+867 Mbps) 802.11ac mini cloud-managed access point with 802.3af PoE support, dual Gigabit Ethernet ports and four internal antennas.

Power Supply is not included with this Radio, 12V - 24V DC @ 1A Input, or PoE (24V Passive PoE or 48V 802.3af PoE)

This radio is available to FIRST teams at a set price, please contact [email protected] if FIRST team price not shown.

Warranty Info:
Please contact Open Mesh for warranty issues or Return Merchandise Authorizations (RMA) for this product. Fill out this form to begin the process, http://www.open-mesh.com/rma

Specifications:

• Speed: 1.17 Gbps (300+867 Mbps)
• Radio: 802.11b/g/n 2.4 GHz + 802.11a/n/ac 5 GHz
• Antenna: Two internal dual band 2x2 (2.4 GHz) + 2x2 (5 GHz)
• Power: 19 dBm (79 mw) flat power
• Range (approximate): 25-50’ indoor (1-2 walls) 100’ outdoor
• Processor: 720 MHz QCA9557 + QCA9882 MIPS 74K
• WLAN Standard: 802.11a/g/n/ac 2.4 + 5 GHz
• Memory: 128MB DRAM
• Ethernet (WAN and LAN): 2 x Gigabit
• Size: 3.75” x 2.75” x 1”

Features: 

• Dual Band 802.11ac
  • Deploy concurrent 2.4GHz + 5GHz ac-ready networks to let newer phones, tablets and laptops fly while still supporting legacy devices.
• High performance
  • The OM5P-AC is available in a 2x2, 1.17 Gbps MIMO configuration for exceptional speed over short distances in dense environments.
• 802.3af PoE
  • Support for 802.3af PoE and 12-24v passive PoE to power your access points up to 300 feet away over a single Ethernet cable.

RED Cordura nylon bumper fabric material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

 

Additional Information:
 

We also have stick-on numbers available (not included with the material).

Specifications

• Color: Red
• Denier: 1000
• Length: 161 in.
• Material: Nylon
• Width: 19.5 in.