Plates
This is the Carrier Plate w/ Sun Gear for the AM Planetary gearbox. Five
planet gears (not included) ride on the dowel pins pressed into this part.
Referencing the picture above, those dowel pins are protruding out the bottom
side of the carrier plate.
Specifications:
The Plate spacer goes on the opposite side of the RAW box from the CIM Motor.
Specifications:
This is the aluminum shaft plate for our 3 Motor Toughbox. A standard
Toughbox could be converted to a 3 Motor Toughbox by using this plate and also
the 3 Motor Toughbox Motor Plate.
Specifications:
This is the aluminum motor mount plate for our 3 Motor Toughbox. A standard
Toughbox could be converted to a 3 Motor Toughbox by using this plate and also
the 3 Motor Toughbox Shaft Plate.
Specifications:
This conversion plate acts as a hub between larger motion components featuring a 1.875" bolt circle to components of a smaller mounting circle such as a NeveRest Gearmotor. The bore of this plate fits shafts that are familiar to FIRST Tech Challenge teams.
Specifications:
The Plate used in the PVC Arm Joint
Specifications
This is a steel compression spring made from music wire. It has closed and
ground flat ends, and is zinc plated.
Specifications:
The Flat Shaft Plate is one plate option for the Toughbox Micro. This plate allows the TB Micro to be mounted to existing robot structure.
This sheet metal plate makes up the inner plate of the TileRunner.
Specifications:
Specifications: