Close
Main Categories
    Filters
    Preferences
    Search

    Spacer, .375 in. thick, 1/2" Hex Bore

    Specifications:

    • Material: Acetal
    • Inside Diameter: 0.510" Hex
    • Outside Diameter: 0.768"
    • Thickness: 0..375"
    MFR Part #: am-3948-375
    $1.00
    49 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Customers who bought this item also bought

    10-32 Nylock Nut

    #am-1042
    $0.08
    (In stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    #10 x 0.75 in. Fender Washer

    #am-1523
    $0.33
    ( 75 In stock)

    This item can only be purchased in multiples of 25

     

    Washers are typically used distribute a fastener load over a wider area. This washer specifically when used with a #10-32 is great for retaining a hex shaft in a hex bearing when the end of the shaft is tapped. This washer has an 0.219 inch inside diameter, 0.75 inch outside diameter, and 0.062 inch thickness.

     

    Specifications

     

    • Bolt Size: #10
    • Finish: Zinc
    • Inside Diameter: 0.219 in.
    • Material: Steel
    • Outside Diameter: 0.750 in.
    • Style: Fender Washer
    • Thickness: 0.062 in.
    • Weight: 0.006 lbs.

    10-32 x 1.5 in. Socket Head Cap Screw

    #am-1014
    $0.95
    ( 229 In stock)

    Specifications

     

    • Drive: 5/32 in. Hex
    • Finish: Zinc
    • Head: Socket Cap
    • Length: 1.5 in.
    • Material: Steel
    • Thread: 10-32
    • Weight: 0.02 lbs

     

    This item can only be purchased in multiples of 10

    0.194 in. ID 0.375 in. OD 1.000 in. Long Nylon Spacer

    #am-1696
    $1.00
    ( 44 In stock)

    This Nylon spacer is 1 inch long and has an inside diameter of 0.194 inches.

     

    Specifications

     

    • Inside Diameter: 0.194 in. [4.9 mm]
    • Length: 1.000 in. [25.4 mm]
    • Material: Nylon
    • Outside Diameter: 0.375 in. [9.5 mm] (3/8)

    24T HTD Pulley, 1/2" Hex Bore

    #am-3403
    $13.85 $15.63
    (In stock)

    Specifications:

    • Flange diameter: 1.654"
    • Outside Diameter: 1.459"
    • Pitch Diameter: 1.504"
    • Width: 0.276"
    • Bore: 0.50" Hex
    • Material: Black Polycarbonate
    • Fits belt types: 5mm pitch HTD timing belt, 9mm wide
    • Weight: 0.0025 Pounds

    Hex Molded Spacers, 1/2 Hex, .063 Thick

    #am-3948-063
    $0.90
    ( 101 In stock)

    These spacers are molded in black polycarbonate, a tough, crack resistant material that FIRST teams are familiar with. These spacers should resist stress cracking. If polycarbonate isn't rugged enough for your high load application or you need custom length spacers, check out our Aluminum Hex Spacer Extrusion.

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $9.00 $10.42
    ( 184 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound