12V Individually Addressable LEDs

Anderson Power Products Connector with 2 contacts. 

Specifications:

• Material (APP Connector): Red Plastic
• Weight: 0.060
• Mounting holes: 0.15" diameter, 3/4" apart

Included Hardware:

• One - SB-50A red plastic connector
• Two - Anderson Power Products crimp contacts (sized for 6 gauge wire)

This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 

Specifications:

• Length: 72" (+/- 1")
• Wall Thickness: 0.062"
• Exterior Corners: Sharp
• Material: 6061-T6 Aluminum
• Weight: 2.4 Pounds

This turnbuckle chain tensioner integrates directly with #25 chain. Using a chain tool, the custom 1/4-20 link bolts replace a chain link and have the pin pushed back through it to become part of the chain. Then simply twist the center coupler to tighten or loosen the chain and tighten the jam nuts once your chain tension is perfect.

All parts are made of steel including the coupler and the custom chain link bolts are 1/4-20 thread for increased strength. One link bolt is left hand threaded and the other is right hand threaded, so take care not to mix them up if purchasing multiple sets.

Material: Steel, all of it.

This gear is the CIM gear for the Toughbox and Toughbox Mini. 

Specifications:

• Material: 4140 steel
• Diametral pitch: 20
• Pressure angle: 14.5
• Number of teeth: 14
• Pitch Diameter: 0.7 inch
• Bore: 0.314 inch (8mm) diameter, with 2mm keyway
• Thickness: 0.50 inch
• Weight: 0.05 pound

These 10 and 12 gauge silicone wire are the best things to happen to robot wiring! Both gauges offer high strand count in a flexible sheathing. This wire allows for tight turns in small spaces, allowing you to achieve cleanliness unlike anything seen before. This is the wiring you need to achieve satisfyingly clean robot wiring, like what FRC Team 1538 achieves every year, but it's also perfect for wire runs that have to move with mechanisms on your robot.

Each product on this page is a pack of 25 feet of red wire and 25 feet of black wire. Each color is separate but packaged together. This is not "zip cord" like our lower strand count wire.

Specifications

• Color: Black and Red
• Diameter: 0.18 in., 0.22 in.
• Gauge: 10, 12
• Insulation: Silicone Rubber
• Length: 25 Feet of Each Color
• Maximum Voltage: 600V
• Strand Count: 650+, 1000+
• Temperature Rating: -60 to 200 Celcius

The 25 Series Plate Sprockets: They roll! They turn! They spin! Everything you could possibly want from a plate sprocket.

These Aluminum sprockets work perfectly with hex shaft and mesh with #25 roller chain.

8 different offerings of our 25 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!

These aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #25 roller chain.  They also work with other build systems that use a 2 in. bolt circle for mounting. The larger versions also have a mounting pattern compatible with 2x1 box tube usefull for making arms.

Affordable and durable 2 inch squish wheels are now available. These wheels are commonly used by competitive robotics teams to move game pieces throughout their robot.

These wheels ship in packs of 10 for $3 per wheel and feature:

• 30A durometer TPE rubber material for maximum squishability
• .375 inch hex hole, intended to be stretched and used on 1/2 inch hex shafts or other larger OD tubes. Each wheel is 1/2 inch thick.
• Weight: .038 lbs per wheel
• STEP CAD file available

These are 3.5" OD x 3.0" ID x .25" x-contact thin section bearings, commonly used in small swerve drive modules by FRC and FTC teams.

Dimensions are 3.5" OD x 3.0" ID x .25" thick.

Weight is 2.2 ounces or .135 lbs.