This gear can be used in the Toughbox, replacing the 14 tooth small cluster gear. It would be paired with a 40 Tooth Large Output Gear, in order to increase the output speed of the Toughbox®. When using this cluster gear you may want to add the 3/16 Thick Nylon Spacer (am-1181) to the shaft. This gear is narrower than the standard Toughbox cluster gear and the spacer fills the gap Standard Toughbox output reduction: 12.76:1 Using this gear and a 40 Tooth Large Output Gear yields a 5.95:1 ratio. Specifications:
This 0.5 in. long 8-32 Button Head Cap Screw is used on the end of a Falcon 500 motor to retain pinions, adapters, or other spline hardware. It is included with the Falcon 500 Spline to 1/2 inch Hex Shaft Adapter.
This 14T 20DP steel gear can be used as an input gear in our Toughbox Mini, Toughbox Micro and Toughbox Classic gearboxes. Use this gear anywhere you could use our 14T 20DP 8 mm Key Bore Gear.