Attaches
This is a Trilobe, thread forming, or thread rolling screw, ideal for applications where the screw is being threaded into plastic or metal.
A flat washer is part of the 5/16 hex head, providing more surface area contact than a regular hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating froms a zinc carbonate film that greatly retards the corrosion rate in a normal atmosphere, which is similar to the aluminum oxide film that forms on aluminum that accounts for its low corrosion rate.
Product Overview:
M3x0.5 Nylock Nut, Steel, Zinc Plate
Specifications:
M5x0.8 Nylock Nut
Specifications:
Specifications:
M5 x 0.8 Nylock Nut
Specifications:
2.5 inch long thread rolling (thread forming) screw
The Hex Washer Head has a flat washer that extends beyond the sides, providing it with a greater bearing surface than a normal hex head fastener. The washer and the Hex Head are bonded together as one piece; this offers greater protection to the mating surface than a standard hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating, retards the corrosion rate in a normal atmosphere.
Specifications:
This item can only be purchased in multiples of 10
This 1/4-20 screw is 1 in. long. This screw is thread forming which means it creates a secure connection with the parts it attaches to without the use of a nut.
This is a thread rolling screw that is 0.75 in. long.
This item can only be purchased in multiples of 10
This Nylock jam nut can be paired with 6-32 screws to mount S3 Tubing
(am-3594) to brackets within the S3 Ecosystem.
Specifications:
Specifications:
Here is a versatile extruded aluminum, hex profile. The outside of this part is a 1/2" hex with small concave dimples which act as weight savings. There is an inside hole tapped to 1/4-20 thread profile.
The outside hex size fits a 1/2" wrench or socket.
Specifications: