Des vis
Specifications:
Specifications:
Specifications:
2.5 inch long thread rolling (thread forming) screw
The Hex Washer Head has a flat washer that extends beyond the sides, providing it with a greater bearing surface than a normal hex head fastener. The washer and the Hex Head are bonded together as one piece; this offers greater protection to the mating surface than a standard hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating, retards the corrosion rate in a normal atmosphere.
Specifications:
1/4-20 x 3" Long Socket Head Cap Screw
Specifications:
This is a steel bolt, with 1/4-20 threads on one end and a bent shaft on the
other. This fastener is used in the 2013 KOP Chassis Kit, as a mounting and belt
tensioning device for mounting the Toughbox Mini.
Specifications:
1/4-28 x 1" Hex Head Screw
Specifications:
Specifications:
3/8-16 x 3.5 inch long Hex Head Bolt
Specifications:
3/8-16 x 4.25 inch long Hex Head Bolt
Specifications:
3/8-16 x 4.75 inch long Hex Head Bolt
Specifications:
3/8-16 x 6 inch long Hex Head Bolt, for use as axles in the C-Base Drive Chassis.
Specifications:
3/8-16 x 7 inch long Hex Head Bolt, for use as axles in the C-Base Drive Chassis 4 of these bolts come standard in the C-Base
Specifications:
Includes,
Specifications:
M3 x 0.5 x 50mm Long Socket Head Cap Screw
Specifications: