Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    AndyMark

    AndyMark

    Voir comme Grille Lister
    Trier par
    Affichage par page

    #10-24x3/4 Thread Forming Screw Minimum Qty 10

    #am-1123
    $0.31
    (En stock)

    This is a Trilobe, thread forming, or thread rolling screw, ideal for applications where the screw is being threaded into plastic or metal. 

    A flat washer is part of the 5/16 hex head, providing more surface area contact than a regular hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating froms a zinc carbonate film that greatly retards the corrosion rate in a normal atmosphere, which is similar to the aluminum oxide film that forms on aluminum that accounts for its low corrosion rate. 

    Product Overview:

    • Quantity: 50
    • Diameter: #10
    • Finish: Zinc
    • Head: 5/16 Hex with integral washer
    • Thread Length: 3/4"
    • Material: Steel
    • Thread Size: 10-24
    • Thread Type: Trilobe, Thread Rolling
    • Weight per Screw: 0.007 lbs
    • Package Weight: 0.34 lbs

    #10-32 x 0.375" Pan Head Phillips Screw - Min 25

    #am-1028
    $0.07
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: 10-32
    • Length: 3/8"
    • Head: Pan Head Phillips

    #10-32 x 0.625" SHCS - Min 25

    #am-1120
    $0.47
    (En stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 5/8 inch
    • Head: Socket Head Cap Screw
    • Yellow Nylon Thread Lock Patch

    #10-32 x 1.5" SHCS - Min 25

    #am-1014
    $0.38
    (En stock)

    Statistics:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 1-1/2 inch
    • Head: Socket Head Cap Screw

    #10-32 x 1.75" SHCS - Min 25

    #am-1048
    $0.38
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 1-3/4"
    • Head: Socket Head Cap Screw

    #10-32 x 2" SHCS - Qty 25

    #am-1049
    $12.30
    (En stock)

    #10-32 x 2" long Socket Head Cap Screw 

    Specifications:

    • Quantity: 25
    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 2 inch
    • Head: Socket Head Cap Screw
    • Weight: 0.422 pounds

    #10-32 x 2.25" SHCS - Qty 25

    #am-1198
    $30.75
    (En stock)

    #10-32 x 2-1/4" long Socket Head Cap Screw 

    Specifications:

    • Quantity: 25
    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 2-1/4 inch
    • Weight: 0.478 pounds
    • Head: Socket Head Cap Screw

    #25 18 Tooth 0.375 inch Hex Sprocket

    #am-3627
    $9.23
    (2 En stock)

    Specifications:

    • Bore: 0.375 in. Hex
    • Series: #25
    • Weight: 0.034 Pounds
    • Material: 7075-T6 Aluminum
    • Thickness: 0.1 in.
    • Tooth Count: 18
    • Hub Diameter: 0.873 in.
    • Overall Depth: 0.4 in.
    • Pitch Diameter: 1.440 in.
    • Outside Diameter: 1.568 in.

    #25 18 Tooth 0.5"Keyed Sprocket

    #am-3618
    $9.23
    (35 En stock)

    This is a 18 tooth sprocket with a 0.5 in. keyed bore.

    #25 18 Tooth 10 mm DD Bore Sprocket

    #am-3632
    $8.46
    (4 En stock)

    This is a 18 tooth sprocket with a 10mm DD bore.

    #25 24 Tooth 0.375 inch Hex Sprocket

    #am-3630
    $9.23
    (En stock)

    Specifications:

    • Bore: 0.375 in. Hex
    • Series: #25
    • Weight: 0.06
    • Material: 7075-T6 Aluminum
    • Thickness: 0.1 in.
    • Tooth Count: 24
    • Hub Diameter: 1.123 in.
    • Overall Depth: 0.4 in.
    • Pitch Diameter: 1.91 in.
    • Outside Diameter: 2.049 in.

    #25 24 Tooth 0.5"Keyed Sprocket

    #am-3620
    $10.76
    (En stock)
    This is a 24 tooth sprocket with a 0.5 in. keyed bore.

    #25 24 Tooth 10 mm DD Bore Sprocket

    #am-3635
    $8.46
    (10 En stock)

    This is a 24 tooth sprocket with a 10mm DD bore.

    #25 Connecting Link for Roller Chain

    #am-0371
    $1.54
    (En stock)

    #25 Connecting Link (Master Link) 

    Specifications:

    • Material: Steel
    • Style: Roller Chain - Spring Clip
    • Type: Connecting Link
    • Size: #25
    • Pitch: 0.250 inch
    • Weight: 0.01 lbs

    #25 Half Link for Roller Chain

    #am-0682
    $3.08
    (En stock)

    #25 Half Link. Also known as #25 Offset Link. 

    Specifications:

    • Material: Steel
    • Style: Roller Chain with interted pin
    • Type: Half Link
    • Size: #25
    • Pitch: 0.25 inch
    • Weight: 0.01 lbs

    #25 Inline Chain Tensioner

    #am-3915_25
    $22.00
    (6 En stock)

    This Inline Chain Tensioner for #25 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #25 Master Links and integrate this to your project for an easy-to-use chain tension solution!

     

    The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

     

     

    Specifications

    • Chain Size: #25

     

    Documents

    CAD File(s)

    am-3915_25 25 Chain Inline Tensioner REV3.STEP

    Layout Print(s)

    am-3915_25 #25 Chain Inline Tensioner REV3.PDF