Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Engrenages

    Engrenages
    Voir comme Grille Lister
    Trier par
    Affichage par page

    11T 0.6 Module 0.125" Round Bore, Steel Gear

    #am-2537
    $10.00
    (0 En stock)

    This is an 11 tooth steel gear. This gear fits onto the 9015 motor shaft so that the 9015 motor can mate with the PG27 gearbox. 

    Specifications:

    • Number of teeth: 11
    • Module: 0.6
    • Pitch Diameter: 6.6 mm
    • Pressure Angle: 20
    • Bore 3.17mm (0.125 inch)
    • Overall Thickness: 8mm
    • Overall Diameter: 0.406"
    • Weight: 0.001 lbs
    • Material: 1215 Steel

    12T 32DP 24T Servo Spline Bore, Brass Gear

    #am-2525
    $30.75
    (En stock)

    Servo City's patented 32 pitch Hitec metal gears are designed to attach directly to the output spline of a servo. All gears are broached directly into the metal to ensure a snug fit that will not slip. These gears are designed to fit the standard 24 tooth Hitec output spline.

    Specifications:

    • Number of teeth: 12
    • Diametral pitch: 32
    • Pitch diameter: .375
    • Face width: 0.250"
    • Bore: 24T Servo Spline
    • Weight: 0.008

    12T 32DP 5 mm Bore Steel Pinion Gear

    #am-3657
    $10.76
    (En stock)

    This 12 tooth pinion gear is designed to fit onto an AndyMark RedLine Motor (am-3775) and other motors with a 5 mm output shaft to interface with spur gearboxes such as the DeCIMate (am-3745), EVO Slim for RedLine and EVO Shifter for RedLine. 

    Specifications:

    • Bore: 5mm press fit
    • Weight: 0.014 Pounds
    • Material: 1117 Steel
    • Overall Length: 0.755 in.
    • Face Width: 0.625 in.
    • Tooth Count: 12
    • Pitch Diameter: 0.375 in.
    • Pressure Angle: 20
    • Diametral Pitch: 32

    12T, NeveRest Classic Motor Pinion Gear

    #am-3104_pinion
    $6.15
    (En stock)

    This gear comes standard as the pinion for the NeveRest motor, am-3104 

    Specifications:

    • Module: 0.5
    • Tooth Count: 12
    • Pressure Angle: 20 Degrees
    • Helix Angle: 18 Degrees, Left
    • Bore: 2.98mm

    14T 20 DP 0.375" Hex Bore, Steel Gear

    #am-3484
    $18.45
    (En stock)

    Specifications:

    • Tooth Count: 14
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 0.7
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.375" Hex
    • Weight: 0.029 Lbs

    14T 20DP 0.375" Hex Bore, Steel Gear

    #am-2354
    $19.99
    (En stock)

    This is the 14 tooth gear in the Toughbox which has a 3/8 inch hex bore. 

    Specifications:

    • Number of teeth: 14
    • Diametral pitch: 20
    • Pressure angle: 14.5 degrees
    • Pitch Diameter: 0.7 inch
    • Face width: 0.575 inch
    • Overall width: 0.600 inch
    • Bore: 0.377 inch hex hole
    • Material: 4140 steel, cold formed into gear teeth
    • Weight: 0.1 lbs.

    15T 32DP 0.312 Bore Steel Gear

    #am-3482
    $13.84
    (16 En stock)

    This gear is used as the input pinion gear for the EVO Shifter. This gear is a tight press fit onto a CIM gear, and requires at minimum a 3-ton arbor press to install. If a CIM motor with this gear pre-installed interests you, check out am-0255_15T. 

    Specifications:

    • Tooth Count: 15
    • Diametral Pitch: 32
    • Pressure Angle: 20
    • Pitch Diameter: 0.469"
    • Face Width: 0.531"
    • Thickness: 0.75"
    • Material: 1117 Steel
    • Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
    • Weight: 0.019 Lbs

    15T, P60 Gearbox Pinion Gear, First Stage 4:1, 3.2mm Shaft

    #am-2892
    $3.00
    (4 En stock)

    This pinion gear attaches to an rs-550 or rs-540 motor so it can be used with a BaneBots P60 gearbox.

    Specifications:

    • 15 Tooth
    • Material: Steel
    • Bore: 3.2mm
    • Gear Thickness: 0.35"
    • Boss Length: 0.106"
    • Boss Diameter: 0.219"
    • Weight: 0.008

    16 tooth, 25 series, DD bore

    #am-2282
    $19.99
    (En stock)
    S25-16HA-DD, 7075 Aluminum Sprocket, 25 Series, 16 tooth, DD Bore

    16T 20DP 10mm Round Bore with 4mm Keyway, Steel Gear

    #am-2088
    $18.45
    (En stock)

    This gear can be used on the any of the PG Series Gearmotors, fitting on the 10mm output shaft. 

    Specifications:

    • Number of Teeth: 16
    • Diametral Pitch: 20
    • Pitch Diameter: 0.8"
    • Pressure Angle: 14.5 Degrees
    • Pitch Diameter: 0.8"
    • Face Width: 0.55"
    • Overall Width: 0.58"
    • Bore: 10mm (0.395") diameter hole w/ 4mm (0.158") keyway
    • Material: 4140 steel, cold formed into gear teeth
    • Weight: 0.08 Pounds

    16T, CIM Sport Pinion

    #am-3785
    $7.69
    (16 En stock)

    This pinion gear attaches to an CIM style motor or gearbox so it can be used with a CIM Sport Gearbox.

    Specifications:

    • Tooth Count: 16
    • Module: 0.7
    • Pressure Angle: 20
    • Pitch Diameter: 0.44 in.
    • Overall Length: 0.35 in.
    • Material: Steel
    • Bore: 0.312" Round (7.92mm) This is a press fit onto the CIM Motor (am-0255)
    • Weight: 0.008 Pounds

    17T 0.6 Module 0.125" Round Bore, Steel Gear

    #am-2068
    $12.30
    (En stock)

    This pinion gear press fits on the AndyMark 9015 motor and is the pinion gear for the PG71 and PG188 gearboxes. 

    Specifications:

    • Number of teeth: 17
    • Module: 0.6
    • Pitch diameter: 10.2 mm
    • Pressure angle: 20 degrees
    • Bore: 0.1245-0.1265"
    • Overall thickness: 0.315"
    • Material: 1215 Steel

    17T 0.6 Module 0.196" Round Bore, Steel Gear

    #am-2487
    $12.30
    (En stock)

    This pinion gear is designed to be pressed onto motors with a 5mm output shaft such as most 700 class motors. This pinion interfaces with our PG71 and PG188 gearboxes.

    Specifications:

    • Number of teeth: 17
    • Module: 0.6
    • Pitch diameter: 10.2 mm
    • Pressure angle: 20 degrees
    • Bore: 0.196 inch
    • Overall thickness: 0.315 inch
    • Material: Steel

    17T 20DP 8mm Round Bore with 2mm Keyway, Steel Gear

    #am-2357
    $18.45
    (En stock)

    Specifications: 

    • Material: 4140 Steel
    • Diametral pitch: 20
    • Pressure angle: 14.5 degrees
    • Number of teeth: 17
    • Pitch diameter: 0.85 inch
    • Bore: 0.313 inch (8mm), with 2mm keyway
    • Gear face width: 0.375 inch
    • Weight: 0.04 pound

    18 Tooth 20DP 0.5 in. Hex Bore Steel Gear

    #AM-4212
    $14.76
    (En stock)

    18T 20 DP 0.375" Hex Bore, Steel Gear

    #am-3534
    $18.45
    (En stock)

    Specifications:

    • Tooth Count: 18
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 0.9"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.375" Hex