Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Pare-chocs et accessoires

    Pare-chocs et accessoires
    Voir comme Grille Lister
    Trier par
    Affichage par page

    2018 AM14U3 Front & Corner Bumper Bracket

    #am-3675
    $10.76
    (En stock)

    This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season. 

    Specifications:

    • Material: 5052 Aluminum
    • Weight: 0.084 Pounds
    • Overall Height: 1.64 in.
    • Material Thickness: 0.125 in.

    2018 AM14U3 Side Bumper Bracket

    #am-3674
    $15.38
    (En stock)

    This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season. 

    Specifications:

    • Material: 5052 Aluminum
    • Weight: 0.126 Pounds
    • Overall Height: 1.0 in.
    • Material Thickness: 0.125 in.

    Blue Bumper Material, 161in x 19.5in

    #am-2676
    $30.00
    (En stock)

    BLUE Cordura nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

    Additional Information:
     

    We also have stick-on numbers available (not included with material).

     

    Specifications

    • Color: Blue
    • Denier: 1000
    • Length: 161 in.
    • Material: Nylon
    • Width: 19.5 in.

    Bumper Kit for Rhino Track Drive Module

    #am-3358
    $75.34
    (En stock)

    This bumper kit is designed and contains parts to attach bumpers to a LEFT and RIGHT Rhino Track Drive Module (am-3322)

    This product focuses on the hardware needed to mount two sets of bumpers to a Rhino Track Drive module, with included parts for a LEFT module and a RIGHT module. The CAD picture above shows the LEFT module with brackets. This product does not include wood, pool noodles, fabric, or numbers.

    Weight of all hardware listed below = 1.9 pounds

    Instructions for preparing plywood for the included brackets is available here. On the Documents tab, individual prints for each bracket are available, along with prints calling out the mounting holes for the brackets.

    Included Hardware:

    • One - Front Left Bumper Bracket for Rhino Track Drive Module (am-3352)
    • One - Front Right Bumper Bracket for Rhino Track Drive Module (am-3353)
    • One - Back Left Bumper Bracket for Rhino Track Drive Module (am-3352)
    • One - Back Right Bumper Bracket for Rhino Track Drive Module (am-3353)
    • Thirty Two - #10-32 Tee Nut (am-1143)
    • Sixteen - #10-32 Thumb Screw (am-1390)
    • Eight - 1/8" dia x 1" long dowel pin (am-1019)
    • Six - #10-32 x 5/8 SHCS (am-1007)
    • Six - 1/4-20 x 5/8 SHCS (am-1053)
    • Six - #10-32 Nylock Nut (am-1042)
    • Six - 1/4-20 Nylock Nut (am-1042)

    Bumper Wood Corner Bracket

    #am-3233
    $12.00
    (En stock)

    The Bumper Wood Corner Bracket is designed to connect two plywood planks together to form a strong 90 degree bumper corner.

     

    Specifications

    • Material: 5052 Aluminum

    Documents

    Layout Print(s)

    am-3233 AM14U3 Bumper Outside Corner Bracket.PDF

    CAD File(s)

    am-3233 AM14U3 Bumper Corner Bracket.STEP

    Generic Bumper Hardware Kit

    #am-0323
    $95.00
    (En stock)

    This bumper hardware kit is designed to fit the AndyMark C-Base Chassis but will fit most custom chassis. It does not include any fabric, pool noodles, or plywood. This is the same hardware that is included in the Red or Blue Bumper Kits.

    Included Hardware:

    • Sixteen - Bumper Mount Bracket, aluminum
    • Thirty-Two - #10-32 Tee Nut
    • Thirty-Two - #10-32 x 1" Socket Cap Screw
    • Eight - 1/4-20 x 2" Socket Cap Screw
    • Eight - 1/4-20 Nylock Nut (am-1015)

    Generic Bumper Kit Blue

    #am-0331
    $139.00
    (0 En stock)

    This bumper kit was originally designed to fit the AndyMark C-Base Chassis but will work on most extrusion based custom frames. 

     

    Plywood is not being shipped with the bumper kit.



    Included Hardware:

    • Six - Pool Noodle, Qty. 6, 55" x 2.5" (am-0838)
    • One - 161" x 19.5" Blue Material Piece
    • Sixteen - Bumper Mount Bracket, aluminum
    • Thirty-Two - #10-32 Tee Nut
    • Thirty-Two - #10-32 x 1" Socket Cap Screw
    • Eight - 1/4-20 x 2" Socket Cap Screw
    • Eight - 1/4-20 Nylock Nut

    Additional Information: 
    We also have stick-on numbers available (not included with material).

    Generic Bumper Kit Red

    #am-0325
    $139.00
    (0 En stock)

    This bumper kit was originally designed to fit the AndyMark C-Base Chassis but will work on most extrusion based custom frames. 

    Plywood is not being shipped with the bumper ki

     

    Included Hardware:

    • Six - Pool Noodle, Qty. 6, 55" x 2.5" (am-0838)
    • One - 161" x 19.5" Red Material Piece
    • Sixteen - Bumper Mount Bracket, aluminum
    • Thirty-Two - #10-32 Tee Nut
    • Thirty-Two - #10-32 x 1" Socket Cap Screw
    • Eight - 1/4-20 x 2" Socket Cap Screw
    • Eight - 1/4-20 Nylock Nut

    Additional Information: 
    We also have stick-on numbers available (not included with material).

    Left Triangle Bracket

    #am-3210L
    $13.00
    (En stock)

    The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.

     

    Documents

     

    Layout Print(s)

    am-3210L Left Triangle Bracket REV2.PDF

    CAD File(s)

    am-3210L Left Bumper Triangle Bracket AM14U3.STEP

    Pool Noodle, 55 inch x 2.5 inch Qty 32

    #am-0837
    $86.00
    (En stock)

    This is a box of 32 pool noodles. These may be used to build bumpers for FIRST Robotics Competition robots. Be sure to read robot rules. If one of these items is ordered, 32 noodles will be shipped to the purchaser, within one box.

     

    Specifications

    • Color: random between purple, blue, red, yellow, orange (choice of color not available)
    • Diameter: Approximately 2.2 to 2.5 in.
    • Length: 54 to 57 in.
    • Weight: 8.020 lbs

    Pool Noodle, 55 inch x 2.5 inch Qty 6

    #am-0838
    $18.45

    These may be used to build bumpers for FIRST Robotics Competition robots. Be sure to read robot rules. 

    Specifications:

    • Length: 54 to 57 inches
    • Measured Diameter: Approximately 2.3 to 2.5 inches
    • Weight : 0.152 pounds each
    • Color: random between purple, blue, red, yellow, orange (choice of color not available)
    • These noodles are often used in these applications:
      • Robot bumpers
      • Flexible swords during frustration-releasing occasions

    Red Bumper Material, 161in x 19.5in

    #am-2675
    $30.00
    (En stock)

    RED Cordura nylon bumper fabric material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

     

    Additional Information:
     

    We also have stick-on numbers available (not included with the material).

     

    Specifications

    • Color: Red
    • Denier: 1000
    • Length: 161 in.
    • Material: Nylon
    • Width: 19.5 in.

    Right Triangle Bracket

    #am-3210R
    $13.00
    (En stock)

    The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.

     

    Documents

     

    Layout Print(s)

    am-3210R Right Triangle Bracket REV2.PDF

    CAD File(s)

    am-3210R Right Bumper Triangle Bracket AM14U3.STEP

    Slick Blue Bumper Material, 161in x 19.5in

    #am-2956
    $28.00
    (4 En stock)

    Slick, blue nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is 200 denier nylon oxford cloth. This material is slick in comparison to other bumper material like am-2676. This may be useful in situations when you want objects or elements to slide on your robot bumper rather than grip to it.

    Slick Red Bumper Material, 161in x 19.5in

    #am-2955
    $28.00
    (4 En stock)

    Slick, red nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is 200 denier nylon oxford cloth. This material is slick in comparison to other bumper material, am-2675. This may be useful in situations when you want objects or elements to slide on your robot bumper rather than grip to it.

    Three Hole Bracket

    #am-0572
    $6.50
    (48 En stock)

    The purpose of this item is to mount to the back side of a plywood board within the AndyMark Blue bumper Kit or Red bumper Kit 

    Specifications:

    • Material: 5052 Aluminum
    • Thickness: 0.093"
    • Weight: 0.02 Lb
    • Finish: Tumbled