Extrusion & Structure
Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket.
The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.
Specifications:
Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket.
The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.
Specifications:
This is a 15 Degree Bracket used in the Ramp.
Specifications:
Walnut Extrusion (am-3478) is the latest iteration of the nut-themed structural extrusion line. It follows the design standards of Peanut Extrusion and expands them to a 2x1 profile.
Walnut is an easy-to-use structural extrusion perfect for building strong, 90 degree joints without gussets. The profile has an end profile of 6 holes for 1/4-20 thread-forming screws on a 5/8 in. square grid pattern. The added rib supports are positioned to flank the pass-through bolts that thread into the adjoining extrusion. These ribs provide extra strength and prevent the side walls of the Walnut from being crushed by over tightening these bolts.
Layout Print(s)
am-3478 Walnut Extrusion Layout.PDF
CAD File(s)
Guide(s)
Walnut Extrusion (am-3478) is the latest iteration of the nut-themed structural extrusion line. It follows the design standards of Peanut Extrusion and expands them to a 2x1 profile.
Walnut is an easy-to-use structural extrusion perfect for building strong, 90 degree joints without gussets. The profile has an end profile of 6 holes for 1/4-20 thread-forming screws on a 5/8 in. square grid pattern. The added rib supports are positioned to flank the pass-through bolts that thread into the adjoining extrusion. These ribs provide extra strength and prevent the side walls of the Walnut from being crushed by over tightening these bolts.
Layout Print(s)
am-3478 Walnut Extrusion Layout.PDF
CAD File(s)
Guide(s)
This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction.
Specifications:
The AndyMark 2x1 Elevator System is designed to be a robust, easy to use solution for building reliable linear motion systems. This easy-to-build bearing kit solves one of the most difficult parts of building these mechanisms by providing precision cut sheet metal brackets to support the rollers and bearings for a smooth single-stage linear system. Use this in conjunction with your existing stockpile of 2" x 1" aluminum tubing and gussets to quickly create linear motion systems of a variety of sizes.
Note: This product is specifically designed for 2"x1" (outside dimensions) aluminum box tubing. It is not compatible with other sizes of aluminum tubing. Sold as an unassembled kit.
Individual Components within Bundle:
This bracket is used to provide a wider spacing on the AM14U2 and AM14U3 chassis. Use this bracket to space out inner and outer plates to accommodate wider wheel profiles on your AM14U chassis.
Specifications:
Churro has proven itself over years of robot market use as a lightweight and versatile extruded aluminum hex profile, great for standoffs, supports, and low load shafts. Churro Lite offers the same great features of Churro now in a 3/8 in. profile. The outside of this extrusion is between 0.368 in. and 0.374 in. hex (with small weight-saving grooves) to fit inside all our 3/8 hex bore products. The center hole is sized to fit a 10-24 thread forming screw. No tapping or threading is needed, as long as a thread forming screw is used.
Specifications:
Churro has proven itself over years of robot market use as a lightweight and versatile extruded aluminum hex profile, great for standoffs, supports, and low load shafts. Churro Lite offers the same great features of Churro now in a 3/8 in. profile. The outside of this extrusion is between 0.368 in. and 0.374 in. hex (with small weight-saving grooves) to fit inside all our 3/8 hex bore products. The center hole is sized to fit a 10-24 thread forming screw. No tapping or threading is needed, as long as a thread forming screw is used.
Specifications:
Churro has proven itself over years of robot market use as a lightweight and versatile extruded aluminum hex profile, great for standoffs, supports, and low load shafts. Churro Lite offers the same great features of Churro now in a 3/8 in. profile. The outside of this extrusion is between 0.368 in. and 0.374 in. hex (with small weight-saving grooves) to fit inside all our 3/8 hex bore products. The center hole is sized to fit a 10-24 thread forming screw. No tapping or threading is needed, as long as a thread forming screw is used.
Specifications:
C-Channel aluminum piece, for use in a C-Base Drive Chassis. 6 of these items come standard in the C-Base, but only 1 is shipped per item purchased.
Specifications:
This sheet metal plate bridges the inner and outer plates of the TileRunner and provides for additional mounting points.
Specifications:
This 64 mm long standoff allows you to place two components 64 mm apart, or the width of four S3 Tubes, using 6-32 screws. Use it to space out two S3 Tubes, or secure an S3 Gusset 64 mm away from other components.
Specifications:
This 16 mm long standoff allows you to place two components 16 mm apart, or the width of one S3 Tube, using 6-32 screws. Use it to space out two S3 Tubes, or secure an S3 Gusset 16 mm away from other components.
Specifications:
This 32 mm long standoff allows you to place two components 32 mm apart, or the width of two S3 Tubes, using 6-32 screws. Use it to space out two S3 Tubes, or secure an S3 Gusset 32 mm away from other components.
Specifications: