Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Thrifty Elevator 2 Stage Kit

    Thrifty Elevator is designed to work with the various brands of 2 in. x 1 in. aluminum box extrusion of any wall thickness on the market. Your team can work with what they like – REV MAXTube, VEX VersaFrame, or simply plain 2" x 1" from your aluminum metal supplier of choice. You bring the 2" x 1" tubing, hex shaft, structural fasteners and gearboxes and we’ll provide the rest.

    # Pièce: TTB-ELEVATOR-2STAGE
    $832.06
    Disponibilité: 1 en stock

    Features include:

    • Single piece aluminum bearing blocks made from 1/4" thick aluminum. These allow for 1/2 inch horizontal spacing between stages and no vertical travel lost due to bearing block geometry.
    • Solid steel chain attachment stud block allows for easy installation of 25H chain.
    • Integrated support for constant force springs that help offset the weight of your sliding stages.
    • Easy CAM tensioning system allows for quick dyneema cable tensioning as needed.
    • 2.5mm thick elevator gussets sized for #10 hardware

    Single Stage Kit Includes:

    QTY 1 - Sliding Elevator Bearing Block Kit

    QTY 1 - Elevator #25 Chain Drive Kit

    QTY 1 - Constant Force Spring Kit

    QTY 1 - Elevator Gusset Kit

    2 Stage Kit Includes:

    QTY 2 - Sliding Elevator Bearing Block Kit

    QTY 1 - Elevator #25 Chain Drive Kit

    QTY 2 - Elevator Dyneema Pulley Kit

    QTY 1 - Constant Force Spring Kit

    QTY 1 - Elevator Gusset Kit

     

    Assembly Guide and STEP CAD Files Available

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    Features include:

    • Single piece aluminum bearing blocks made from 1/4" thick aluminum. These allow for 1/2 inch horizontal spacing between stages and no vertical travel lost due to bearing block geometry.
    • Solid steel chain attachment stud block allows for easy installation of 25H chain.
    • Integrated support for constant force springs that help offset the weight of your sliding stages.
    • Easy CAM tensioning system allows for quick dyneema cable tensioning as needed.
    • 2.5mm thick elevator gussets sized for #10 hardware

    Single Stage Kit Includes:

    QTY 1 - Sliding Elevator Bearing Block Kit

    QTY 1 - Elevator #25 Chain Drive Kit

    QTY 1 - Constant Force Spring Kit

    QTY 1 - Elevator Gusset Kit

    2 Stage Kit Includes:

    QTY 2 - Sliding Elevator Bearing Block Kit

    QTY 1 - Elevator #25 Chain Drive Kit

    QTY 2 - Elevator Dyneema Pulley Kit

    QTY 1 - Constant Force Spring Kit

    QTY 1 - Elevator Gusset Kit

     

    Assembly Guide and STEP CAD Files Available

    Les clients ayant acheté cet article ont également acheté

    Aluminum 1/2 Inch Hex Bore Split Clamping Collar - QTY 5

    #TTB-0002
    $27.78
    (21 En stock)

    Tired of hex clamp collars that cost an arm and a leg? Tired of stripping out the set screw on your clamp collar? Need to add a collar in an assembly and don't want to remove everything from your hex shaft?

    Me too! I've ran into all of the above scenarios multiple times building multiple robots. These collars are the holy grail -

    • split so they can easily be added or removed
    • lightweight 6061 aluminum
    • .5 oz (.031 lbs) for one hex collar
    • uses two 8-32 socket head cap screws that require a 9/64" allen wrench
    • $4.00 per collar, sold in 5 packs
    • anodized black for awesomeness

     

    General Dimensions:

     

    Thrifty Clamping Bearing Block

    #TTB-0031
    $33.32
    (0 En stock)

    The Thrifty Clamping Bearing Block provides teams a quick and easy way to capture 1.125" OD flanged bearings when mounting to 2" x 1" or 1" x 1" box extrusion. Simply drill a pass thru clearance hole and insert the bearing which is then trapped against the extrusion wall's material.

     

    Features include -

     

    • Clamps around 2" x 1" or 1" x 1" extrusions
    • Two counterbored 10-32 holes 2" apart allow for mounting of planetary gearboxes or 2" bolt circle motors
    • #8 holes on a 1.875" diameter bolt circle allow for usability in existing FRC applications
    • 6061 Aluminum material anodized black

     

    Kit includes:

     

    - Two black anodized plates

    - Four 10-32 1.5" long button head bolts

    - Two 10-32 0.50" long bolts

     

    Bearings are NOT included with this kit

    Thrifty Motor Megaplate - QTY 2

    #TTB-0035
    $20.82
    (11 En stock)

    Mount all the things with this latest offering from The Thrifty Bot! Finally a plate that can interface with just about any common motor or planetary gearbox in the FIRST Robotics Competition. This 4mm thick 6061 aluminum black anodized plate includes bolt mounting patterns for the following motors and planetary gearboxes:

     

    - REV Ultraplanetary Gearbox

    - REV NEO 550 & Banebots 550 Brushed motors

    - VEX Versaplanetary and Versaplanetary Lite gearboxes

    - AndyMark 57 Sport planetary gearboxes

    - 775 series brushed motors

    - REV NEO & Falcon 500 brushless motors

    - Traditional Mini-CIM & CIM motors

     

    - 4mm thick (.157") allows for stronger cantilevered applications

    - 1/4" hole to hole spacing, 1/2" spacing between hole rows. Holes are .164" natively supporting #8 bolts or 5/32 rivets. Holes can be drilled out to support #10 hardware.

    1 plate weight: .079 lbs

     

    STEP CAD file available

    Layout Drawing available

    Aluminum T Gussets - QTY 8

    #TTB-0012
    $27.77
    (30 En stock)

    This 8 pack of 2.5mm thick T gussets can be used to assemble frames or other mechanisms commonly used in competitive robotics.

     

    • 3.50 in. x 3.25 in. with 1 inch wide ends
    • .163" holes spaced 1/2 an inch apart, perfect for 5/32 rivets
    • 2.5mm (0.098 in.) thick, made from 6061-T6 aluminum
    • .055 lbs per L gusset
    • Sold in 8 packs

     

    CAD model available

    2 Inch Vectored Intake Wheel - QTY 4

    #TTB-0010
    $48.60
    (4 En stock)

    The original vectored intake wheel, now with even more options. This wheel design was battle tested and match proven on many FRC robots during the 2020 season. These wheels help with redirecting game objects while imparting lateral force, helping to move game pieces either left or right in the direction you desire.

    Aluminum L Gussets - QTY 8

    #TTB-0007
    $27.77
    (20 En stock)

    This 8 pack of 2.5mm thick L gussets can be used to assemble frames or other mechanisms commonly used in competitive robotics.

    • 2.75 in. x 2.75 in. with 1 inch wide ends
    • .163" holes spaced 1/2 an inch apart, perfect for 5/32 rivets
    • 2.5mm (0.098 in.) thick, made from 6061-T6 aluminum
    • .04 lbs per L gusset
    • Sold in 8 packs

     

    CAD model available