Fermer
Menu
toutes catégories
    (0) Produits
    Vous avez pas d'articles dans votre panier.
    (0) Soumission
    Vous avez pas d'articles dans votre panier.
    Menu
    Panier
    filtres
    préférences
    Rechercher
    PrécédentStudica xsTECH Cutting Tool...
    SuivantSolid Carbide Spiral End Mi...

    xsTECH Cutting Tool Kit

    Soyez le premier a tester ce produit

    Replacement tool kit for the xsTech Router

    # Pièce: 39624
    $279,00
    2 en stock

    Kit contains one each of the following:

    • PN 39167 - Spiral 'O' Flute Up-Cut End Mill: 2 mm x 12 mm x 4 mm x 50 mm
    • PN 39176 - Spiral Down-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39175 Spiral Down-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39174 - Spiral Up-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39173 - Spiral Compression End Mill: 4 mm x 20 mm x 4 mm x 50 mm
    • PN 39172 - Spiral Down-Cut End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39171 - Spiral Ball Nose Up-Cut End Mill: 2 mm x 12 mm x 4 mm x 50 mm
    • PN 39170 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39169 - Spiral 'O' Flute Down-Cut End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39168 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39166 - Straight Ball Nose End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39165 - Tapered Ball Nose End Mill: 1 mm x 10 mm x 4 mm x 50 mm
    • PN 39164 - Square End Mill: 4 mm x 6 mm x 4 mm x 50 mm
    • PN 39163 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 8 mm x 4 mm x 30 mm
    • PN 39162 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 6 mm x 4 mm x 40 mm
    • PN 39161 - Spiral 'O' Flute Up-Cut End Mill: 2 mm x 6 mm x 4 mm x 40 mm
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent

    A également acheté

    Tormach xsTECH Router

    #50687
    Demander un devis
    ( 11 En stock)

    The xsTECH Router is a desktop CNC ready to use out of the box. It's small enough to fit in a craftroom or makerspace, and it's capable enough to cuts all manners of plastics, woods, and even aluminum.

     

    The see-through enclosure offers safe use and controls dust that can muck up your space and electronics.

     

    This product is evaluated to the Model Code SPE-1000 and is ESA/CSA approved according to National Standards, for use in Canada when purchased through Studica.

     

    DOWNLOAD TECHNICAL SPECIFICATIONS

     

     

    Studica xsTECH Cutting Tool Kit

    #79999
    $49,00
    ( 6 En stock)

    Studica 6 piece tool kit for the xsTech Router

     

    • Code: 1028
    • Material: Carbide
    • Coating: DLC
    • Shank diameter: 4 mm
    • Overall length: 50 mm

    Tormach xsTECH Aluminum Fixture Tooling Plate

    #SMW XSTECH
    $169,00
    ( 0 En stock)

    12" x 5.95" x 0.575" 6061 Aluminum Fixture & Tooling Plate for Tormach xsTECH Routers. 

     Holes are 0.75" on center.  Every hole is tapped 1/4"-20.

    SMW FIXTURE PLATE ACCESSORY KITS (Hobby)

    #MVSH
    $429,00
    1/4" Mod Vise1
    1/4" Fixturing Pins2
    Soft Jaws1 Pair
    Talon Grips4
    Reversible Jaw Insert

    Kit contains one each of the following:

    • PN 39167 - Spiral 'O' Flute Up-Cut End Mill: 2 mm x 12 mm x 4 mm x 50 mm
    • PN 39176 - Spiral Down-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39175 Spiral Down-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39174 - Spiral Up-Cut Plunge End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39173 - Spiral Compression End Mill: 4 mm x 20 mm x 4 mm x 50 mm
    • PN 39172 - Spiral Down-Cut End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39171 - Spiral Ball Nose Up-Cut End Mill: 2 mm x 12 mm x 4 mm x 50 mm
    • PN 39170 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39169 - Spiral 'O' Flute Down-Cut End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39168 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 12 mm x 4 mm x 50 mm
    • PN 39166 - Straight Ball Nose End Mill: 4 mm x 25 mm x 4 mm x 50 mm
    • PN 39165 - Tapered Ball Nose End Mill: 1 mm x 10 mm x 4 mm x 50 mm
    • PN 39164 - Square End Mill: 4 mm x 6 mm x 4 mm x 50 mm
    • PN 39163 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 8 mm x 4 mm x 30 mm
    • PN 39162 - Spiral 'O' Flute Up-Cut End Mill: 4 mm x 6 mm x 4 mm x 40 mm
    • PN 39161 - Spiral 'O' Flute Up-Cut End Mill: 2 mm x 6 mm x 4 mm x 40 mm
    Les clients ayant acheté cet article ont également acheté

    Tormach xsTECH Router

    #50687
    Demander un devis
    ( 11 En stock)

    The xsTECH Router is a desktop CNC ready to use out of the box. It's small enough to fit in a craftroom or makerspace, and it's capable enough to cuts all manners of plastics, woods, and even aluminum.

     

    The see-through enclosure offers safe use and controls dust that can muck up your space and electronics.

     

    This product is evaluated to the Model Code SPE-1000 and is ESA/CSA approved according to National Standards, for use in Canada when purchased through Studica.

     

    DOWNLOAD TECHNICAL SPECIFICATIONS

     

     

    Studica xsTECH Cutting Tool Kit

    #79999
    $49,00
    ( 6 En stock)

    Studica 6 piece tool kit for the xsTech Router

     

    • Code: 1028
    • Material: Carbide
    • Coating: DLC
    • Shank diameter: 4 mm
    • Overall length: 50 mm

    Tormach xsTECH Aluminum Fixture Tooling Plate

    #SMW XSTECH
    $169,00
    ( 0 En stock)

    12" x 5.95" x 0.575" 6061 Aluminum Fixture & Tooling Plate for Tormach xsTECH Routers. 

     Holes are 0.75" on center.  Every hole is tapped 1/4"-20.

    SMW FIXTURE PLATE ACCESSORY KITS (Hobby)

    #MVSH
    $429,00
    1/4" Mod Vise1
    1/4" Fixturing Pins2
    Soft Jaws1 Pair
    Talon Grips4
    Reversible Jaw Insert
    Informations
    Service Clients
    Mon compte
    Informations de contact
    Droit d'auteur et copie; 2024 Studica Limited. Tous les droits sont réservés.