Close
Main Categories
    Filters
    Preferences
    Search

    3mm, UHMWPE Cord, 10M

    High-strength and low-stretch cord that is ideal for actuating lifts and other linear mechanisms.This cord type minimizes the need for adjustments and re-tensioning after first assembly due to its low-stretch properties.

     

    MFR Part #: 7291244
    $12.50
    • Material: Ultra-high-molecular-weight Polyethylene (UHMWPE)
    • Load Rating: 1500lb+
    • Diameter: 3mm
    • Length: 10m (32.8ft) 
    • Color: Varies (Dark Grey, Orange)
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    • Material: Ultra-high-molecular-weight Polyethylene (UHMWPE)
    • Load Rating: 1500lb+
    • Diameter: 3mm
    • Length: 10m (32.8ft) 
    • Color: Varies (Dark Grey, Orange)
    Customers who bought this item also bought

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $9.00 $10.42
    ( 283 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    Aluminum 1/2 Inch Hex Bore Split Clamping Collar - QTY 5

    #TTB-0002
    $28.99
    ( 11 In stock)

    Tired of hex clamp collars that cost an arm and a leg? Tired of stripping out the set screw on your clamp collar? Need to add a collar in an assembly and don't want to remove everything from your hex shaft?

    Me too! I've ran into all of the above scenarios multiple times building multiple robots. These collars are the holy grail -

    • split so they can easily be added or removed
    • lightweight 6061 aluminum
    • .5 oz (.031 lbs) for one hex collar
    • uses two 8-32 socket head cap screws that require a 9/64" allen wrench
    • $4.00 per collar, sold in 5 packs
    • anodized black for awesomeness

     

    General Dimensions:

     

    Linear Slide Rail, 384mm Length, 240mm Stroke

    #72067
    $24.99
    ( 1318 In stock)

    The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length. 

     

    • Width: 24mm
    • Height: 7.2mm
    • Length: 384mm
    • Stroke: 240mm
    • Extendended length: 530mm
    • Material: 6061 Aluminum
    • Step file

    Sport Gearbox Mount Bracket

    #am-4245
    $6.00

    This bracket was originally created to mount the many variants of the Sport Gearbox but has proved to be a very versatile mounting bracket. Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to locate the 1.5 inch outside diameter of a Blue Sport gearbox. 

    F6 Flexible 1/2" Self-Wrap Split Braided Sleeving, 10ft section

    #am-2602
    $15.38 $17.36
    (In stock)

    F6's unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.) The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses.

    Flanged Bearing 6mm Bore - 14mm OD (12 pack)

    #76302-12
    $29.99
    ( 315 In stock)

    The 6mm round ID Flanged Bearing fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

    • Quantity: 12
    • Material: AISI440C stainless steel
    • Sealed Type: ZZ metal shields
    • Precision: ABEC-3
    • Clearance: C0
    • Lubrication:Kyodo SRL Grease
    • ID (inner diameter)/Bore:6 mm
    • OD (outer diameter): 14 mm
    • OD of Flanged Size: 15 mm
    • Width: 5 mm
    • Thickness of Flange: 1 mm
    • Step File

    Expansion Hub Encoder Cable

    #70197
    $5.25

    This is the cable designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.

     

    2019 Update:

    The 'a' version of this cable as the encoder channels swapped so that the encoder counts in the same direction as the output shaft spins. This simplifies the usage of the encoder with the various programming languages for FTC!

    Specifications

    • Length: 20 in.

    50T 20DP 0.5" Hex Bore, Steel Gear

    #am-3488
    $27.68 $31.25
    (In stock)

    Specifications:

    • Tooth Count: 50
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 2.5"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.5" Hex
    • Weight: 0.25 Lbs