Belts and Pulleys
The 5mm Round Groove Belt is 3M long and has a 10% stretch. It is also referred to as a U Groove belt.
The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. Two set screws using 1.5mm hex key.
3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.
Includes two 5mm Bore, 10 Tooth Aluminum Pulleys and one 1M XL Timing belt
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
These round groove pulleys are also referred to as U groove pulleys. They are made of 6061-T6 Aluminum with a D-Shaft hole through of 6mm, and 2 set screws for ultimate strength. Use it with the 5mm Round Belt and for gearing up or down combine them with the other round groove pulleys that range from 10mm to 60mm.
Specifications:
The 20 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
The 30 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
The 40 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
The 60 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
The 80 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts.
Specifications:
GT2-6mm Smooth Idler Pulley, H Type, w/3mm Inner Bore Bearing
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch, 6mm width, and open 1000mm in length. Use any of the GT2 pulleys from Studica and the clamp kit.
Specifications:
This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width
Specifications:
This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400
This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400
This stretchy latex rubber tubing is sized to fit through any of the M3 holes in the Studica Robotics channel, brackets, wheels, gears or other motion products.
GT2 Pulley
Φ22.0mm*13.0mm thick
2*M4 thread for M4 set screws
Φ6.0mm D hole
AL6061-T6
Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.
Specifications:
The XL series belt is compatible with the 6mm, 10 tooth XL pulley.
Specifications:
The Studica Robotics 10mm OD round groove 6mm Hex pulley is for use with your robot design builds.
The Studica Robotics 20mm OD round groove 6mm hex pulley is for use in robot design builds.
The Studica Robotics 30mm OD round groove 6mm hex pulley is for use with robotics design builds.
The Studica Robotics 40mm OD round groove 6mm hex pulley is for use with your robotics design builds.
The Studica Robotics 50mm OD round groove 6mm hex pulley is for use with your robotics design builds.
The Studica Robotics 60mm OD round groove 6mm hex pulley is for use with your robotics design builds.
The Studica Robotics 80 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.
The Studica Robotics 60 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts in your robotics builds.
The Studica Robotics 40 Tooth GT2 6mm Hex-Shaft Timing Belt Pulley can be used with any of the GT2 belts in your robotics builds.
The Studica Robotics 12 Tooth 5mm Pitch GT2 Hex-Shaft Pulley is ideal for your robotics design builds.
The Studica Robotics 20 Tooth GT2-6mm Timing Belt Hex-Shaft Pulley can be used with any of the GT2 belts.