Close
Main Categories
    Filters
    Preferences
    Search

    AndyMark 130 Tooth 9 mm Wide 5 mm Pitch HTD Timing Belt

    These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer genuine Gates brand belts, AndyMark branded belts, as well as lower-cost generic brand belts.

     

    Current Belt Offerings

     

    Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

     

    AndyMark Brand Belts

    • 30T - 150-HTD-5M-9 - am-5209_30T
    • 35T - 175-HTD-5M-9 - am-5209_35T
    • 40T - 200-HTD-5M-9 - am-5209_40T
    • 45T - 225-HTD-5M-9 - am-5209_45T
    • 50T - 250-HTD-5M-9 - am-5209_50T
    • 55T - 275-HTD-5M-9 - am-5209_55T
    • 60T - 300-HTD-5M-9 - am-5209_60T
    • 64T - 320-HTD-5M-9 - am-5209_64T
    • 65T - 325-HTD-5M-9 - am-5209_65T
    • 70T - 350-HTD-5M-9 - am-5209_70T
    • 75T - 375-HTD-5M-9 - am-5209_75T
    • 80T - 400-HTD-5M-9 - am-5209_80T
    • 85T - 425-HTD-5M-9 - am-5209_85T
    • 90T - 450-HTD-5M-9 - am-5209_90T
    • 91T - 455-HTD-5M-9 - am-5209_91T
    • 93T - 465-HTD-5M-9 - am-5209_93T
    • 95T - 475-HTD-5M-9 - am-5209_95T
    • 100T - 500-HTD-5M-9 - am-5209_100T
    • 105T - 525-HTD-5M-9 - am-5209_105T
    • 106T - 530-HTD-5M-9 - am-5209_106T
    • 110T - 550-HTD-5M-9 - am-5209_110T
    • 115T - 575-HTD-5M-9 - am-5209_115T
    • 120T - 600-HTD-5M-9 - am-5209_120T
    • 121T - 605-HTD-5M-9 - am-5209_121T
    • 125T - 625-HTD-5M-9 - am-5209_125T
    • 130T - 650-HTD-5M-9 - am-5209_130T
    • 135T - 675-HTD-5M-9 - am-5209_135T
    • 136T - 680-HTD-5M-9 - am-5209_136T
    • 140T - 700-HTD-5M-9 - am-5209_140T
    • 145T - 725-HTD-5M-9 - am-5209_145T
    • 150T - 750-HTD-5M-9 - am-5209_150T
    • 152T - 760-HTD-5M-9 - am-5209_152T
    • 160T - 800-HTD-5M-9 - am-5209_160T
    • 167T - 835-HTD-5M-9 - am-5209_167T
    • 170T - 850-HTD-5M-9 - am-5209_170T
    • 180T - 900-HTD-5M-9 - am-5209_180T
    • 190T - 950-HTD-5M-9 - am-5209_190T
    • 200T - 1000-HTD-5M-9 - am-5209_200T
    • 225T - 1125-HTD-5M-9 - am-5209_225T
    • 250T - 1250-HTD-5M-9 - am-5209_250T
    MFR Part #: am-5209_130T
    $15.00
    Availability: 10 in stock
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent
    Customers who bought this item also bought

    2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

    #am-3462_green
    $8.00
    (122 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    2x2x10 mm Machine Key, steel

    #am-1121
    $1.08
    (In stock)

    Machine Key, steel. Used in 2.5" CIM Motor shafts. 

    Specifications:

    • Width: 2mm (0.078 inch)
    • Length: 10mm (0.394 inch)
    • Weight: 0.0008 pounds

    24T HTD Pulley, 1/2" Hex Bore

    #am-3403
    $13.85
    (In stock)

    Specifications:

    • Flange diameter: 1.654"
    • Outside Diameter: 1.459"
    • Pitch Diameter: 1.504"
    • Width: 0.276"
    • Bore: 0.50" Hex
    • Material: Black Polycarbonate
    • Fits belt types: 5mm pitch HTD timing belt, 9mm wide
    • Weight: 0.0025 Pounds

    Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

    #am-2986
    $8.00
    (239 In stock)

    This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

    This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


    Specifications:

    • Inside diameter: 0.500-0.502 inch hex bore
    • Outside diameter: 1.125 inch
    • Flange thickness: 0.062 inch
    • Overall thickness: 0.312 inch
    • Weight: 0.05 pound

    8 mm ID 22 mm OD Shielded Bearing (608ZZ)

    #am-4456
    $5.00
    (35 In stock)

    This is an 8 mm round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

     

    Specifications

    • Bore: 8 mm Round
    • Flange: Unflanged
    • Material: Steel
    • Outside Diameter: 22 mm
    • Seal Type: Shielded
    • Style: Radial
    • Weight: 0.025 lbs
    • Width: 7 mm

    2 x 1 x 0.063 Aluminum Box Extrusion, 6ft

    #am-3214-6
    $49.00
    (9 In stock)

    This sharp-cornered 6061-T6 aluminum extrusion is a robust and lightweight solution for custom robot frames and mechanism construction. 

    Specifications:

    • Length: 72" (+/- 1")
    • Wall Thickness: 0.062"
    • Exterior Corners: Sharp
    • Material: 6061-T6 Aluminum
    • Weight: 2.4 Pounds