This is a 14-16 gauge Female connector to quickly wire your robot. This connector pairs with this Male connector. Ten (10) pieces are included in this part, packed in a baggie. Specifications:
Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!
Shaft Compatability
This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.
This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.
These aluminum box extrusions are robust and lightweight solutions for custom robot frames, superstructures and mechanism construction. Made to all of your favorite English sizes, the classic 2x1 thin wall tubing is now joined by its thicker-walled counterpart. We have also introduced two thicknesses of 1x1 sizes that teams know and love to build their medium-sized mechanisms.
For smaller mechanisms, we recommend using our 5/8 square box tube that is also compatible with our S3 line of brackets and gussets.
Available Sizes:
Be sure to all check out our Gussets as they work wonderfully with all of these wonderful extrusions.
Layout Print(s)
am-3214 2x1x0625 6061-T6 wall tubing.PDF
am-4203 1x1x063 wall tubing.PDF
am-4204 1x1x0.125 wall tubing.PDF
am-4205 2x1x0.125 wall tubing.PDF
CAD File(s)
am-3214 2x1x0625 wall tubing.STEP
am-4203 1x1x0625 wall tubing.STEP
am-4204 1x1x0.125 wall tubing.STEP
am-4205 2x1x0.125 wall tubing.STEP
This is a pneumatic in-line flow control fitting, with flow metering as the air exits (meter out) through the push-to-connect fittings. Specifications:
Peanut Extrusion is the 1"x1" installment of our easy-to-use structure system. The profile of this extrusion looks like a peanut, and has two holes sized for 1/4-20 thread-forming screws. The added mid-spans are positioned to flank a pair of bolts that self thread into an adjoining piece pf Peanut Extrusion. These spans prevent the extrusion from getting crushed by over-tightening. Enjoy the ease of creating rigid corner joints without gussets, with a closed profile that prevents dust and debris build up. Whether you are making a table in your shop or a strong frame for a robot, this extrusion is the one for you!
Walnut Extrusion is the 2"x1" iteration of the Peanut profile.
am-3090-1 One Foot Peanut Extrusion.STEP
am-3090 Peanut Extrusion.PDF
This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup. Specifications:
This is a 25 foot section of a twisted pair of 22 AWG wire.
Over the past several years, many teams have started using lights to aid their aiming from the far end of the field. Whether you call it a photon cannon, a flashlight, or something else, being able to align a beam of light to a field element is a fast way for your drivers to find the sweet spot for shooting or other actions from a distance. This light, originally used on motorcycles, comes with a convenient mounting bracket for easy installation. This kit comes with 7 colored filters to insert behind the lens. Replacement filters are available, as is the target light alone. Specifications:
This converter takes 11-40V DC and steps it down to 5VDC, which makes it perfect for supplying power to an RGB LED Light strip such as, am-2916. Features and Specifications:
Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more.
The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!
Learn how to attach these hubs to AndyMark wheels by watching this video!