Close
Main Categories
    Filters
    Preferences
    Search

    Constant Force Spring Kit

    This kit provides enough hardware to mount your constant force spring to your elevator structure. Includes a 16.5 pound 48" inch travel constant force spring, 2 solid aluminum brackets and assorted hardware.

    MFR Part #: TTB-ELEV-SPRING
    $69.44
    Availability: 5 in stock

     

    Constant Force Spring Kit (1-2 kits per elevator)

    QTY

    TTB-ELEV-SPRING

    Constant Force Spring Holder

    2

    ELEV-SPRING-001

    Constant Force Spring 50" Travel 16.5 lbs

    1

    ELEV-SPRING-002

    Constant Force Spring Spool

    1

    ELEV-SPRING-003

    Constant Force Spring Retainer

    2

    ELEV-SPRING-004

    Socket Head 10-32 Bolt 2.25" Long

    4

    8230

    Socket Head 1/4-20 Bolt 2.25" Long

    2

    8034

    1/4-20 Locknut

    2

    18197

     

    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

     

    Constant Force Spring Kit (1-2 kits per elevator)

    QTY

    TTB-ELEV-SPRING

    Constant Force Spring Holder

    2

    ELEV-SPRING-001

    Constant Force Spring 50" Travel 16.5 lbs

    1

    ELEV-SPRING-002

    Constant Force Spring Spool

    1

    ELEV-SPRING-003

    Constant Force Spring Retainer

    2

    ELEV-SPRING-004

    Socket Head 10-32 Bolt 2.25" Long

    4

    8230

    Socket Head 1/4-20 Bolt 2.25" Long

    2

    8034

    1/4-20 Locknut

    2

    18197

     

    Customers who bought this item also bought

    Aluminum T Gussets - QTY 8

    #TTB-0012
    $27.77
    (30 In stock)

    This 8 pack of 2.5mm thick T gussets can be used to assemble frames or other mechanisms commonly used in competitive robotics.

     

    • 3.50 in. x 3.25 in. with 1 inch wide ends
    • .163" holes spaced 1/2 an inch apart, perfect for 5/32 rivets
    • 2.5mm (0.098 in.) thick, made from 6061-T6 aluminum
    • .055 lbs per L gusset
    • Sold in 8 packs

     

    CAD model available

    Aluminum L Gussets - QTY 8

    #TTB-0007
    $27.77
    (22 In stock)

    This 8 pack of 2.5mm thick L gussets can be used to assemble frames or other mechanisms commonly used in competitive robotics.

    • 2.75 in. x 2.75 in. with 1 inch wide ends
    • .163" holes spaced 1/2 an inch apart, perfect for 5/32 rivets
    • 2.5mm (0.098 in.) thick, made from 6061-T6 aluminum
    • .04 lbs per L gusset
    • Sold in 8 packs

     

    CAD model available

    11 Tooth HTD Motor Output Pulley - Falcon Motor Bore

    #TTB-0062
    $16.66
    (18 In stock)

    These aluminum 5M HTD Pulleys work great for creating belt reductions directly off the motor. Use a 15mm wide belt or two 9mm wide belts as the inside pulley teeth are 18.5mm wide. Choose either 8mm keyed bore or spline bore depending on the motor type you're using.

    Aluminum 1/2 Inch Hex Bore Split Clamping Collar - QTY 5

    #TTB-0002
    $27.78
    (21 In stock)

    Tired of hex clamp collars that cost an arm and a leg? Tired of stripping out the set screw on your clamp collar? Need to add a collar in an assembly and don't want to remove everything from your hex shaft?

    Me too! I've ran into all of the above scenarios multiple times building multiple robots. These collars are the holy grail -

    • split so they can easily be added or removed
    • lightweight 6061 aluminum
    • .5 oz (.031 lbs) for one hex collar
    • uses two 8-32 socket head cap screws that require a 9/64" allen wrench
    • $4.00 per collar, sold in 5 packs
    • anodized black for awesomeness

     

    General Dimensions:

     

    #25 Chain Tensioner - QTY 1

    #ELEV-DRIVE-007
    $20.82
    (13 In stock)

    This turnbuckle chain tensioner integrates directly with #25 chain. Using a chain tool, the custom 1/4-20 link bolts replace a chain link and have the pin pushed back through it to become part of the chain. Then simply twist the center coupler to tighten or loosen the chain and tighten the jam nuts once your chain tension is perfect.

     

    All parts are made of steel including the coupler and the custom chain link bolts are 1/4-20 thread for increased strength. One link bolt is left hand threaded and the other is right hand threaded, so take care not to mix them up if purchasing multiple sets.

     

    Material: Steel, all of it.

    Thrifty Clamping Bearing Block

    #TTB-0031
    $33.32
    (0 In stock)

    The Thrifty Clamping Bearing Block provides teams a quick and easy way to capture 1.125" OD flanged bearings when mounting to 2" x 1" or 1" x 1" box extrusion. Simply drill a pass thru clearance hole and insert the bearing which is then trapped against the extrusion wall's material.

     

    Features include -

     

    • Clamps around 2" x 1" or 1" x 1" extrusions
    • Two counterbored 10-32 holes 2" apart allow for mounting of planetary gearboxes or 2" bolt circle motors
    • #8 holes on a 1.875" diameter bolt circle allow for usability in existing FRC applications
    • 6061 Aluminum material anodized black

     

    Kit includes:

     

    - Two black anodized plates

    - Four 10-32 1.5" long button head bolts

    - Two 10-32 0.50" long bolts

     

    Bearings are NOT included with this kit