Combining the excitement of sport with the rigors of science & technology
Under strict rules and limited time and resources, teams of high school students are challenged to build industrial-size robots to play a difficult field game in alliance with other teams, while also fundraising to meet their goals, designing a team “brand,” and advancing respect and appreciation for STEM within the local community.
Studica is a proud supporter of FIRST and manufacter of both the NavX MXP and the NAVx Micro 9-axis IMU's for FIRST Robotics
We are also the Canadian Distributors for AndyMark and The Thrifty Bot.
FRC and FTC Sponsorship Program
Studica offers several First Robotics Team sponsorship opportunities per year:
Eligibility
There are eligibility requirements to qualify for approval to allow access to a broader community. To apply you must:
Be a Mentor or Parent of a registered Canadian FRC or FTC team.
Be engaged in STEM Learning and the facilitation of STEM concepts in a School or Community Group which allows unrestricted access to team and competition activities.
Be willing to feature Studica as a sponsor on your robot and through online means.
Application Process
Please submit the following to apply for a Studica sponsorship:
Complete this application form.
Submit your Cover Letter to Studica via [email protected] and inform us that you have completed the online application form.
These plates are included in the 2024 KitBot. Made from 0.125 in. Aluminum, these Plates are used for various structures throughout the KitBot.
Quantity of each plate included in the 2024 KitBot:
CAD File(s)
am-5294 KitBot 2024 Top Corner Bracket.STEP
am-5295 KitBot 2024 Motor Mount Plate.STEP
am-5296 KitBot 2024 Tube Mounting Plate.STEP
This adapter converts an 8 mm keyed shaft to 1/2 in. hex. The keyway is 2 mm wide. This allows you to adapt the output of a motor or gearbox like the CIM Motor (am-0255) to any of our hubs or wheels with a 1/2 in. hex bore. You'll need a 2 mm machine key (am-1121) to complete the assembly and transmit torque from the motor.
This adapter is no longer available in the 0.75 in. length.
This is a 4" outer diameter X-contact bearing that is sealed on BOTH sides of the bearing with a rubber seal. This type of bearing is for teams who want to keep field debris out of their typical non-shielded x-contact bearings.
Dimensions are 4" OD x 3.5" ID x .25" thick.
Weight is 2.72 ounces or .17 lbs.
Specifications:
Use this 1 inch long adapter to directly drive 1/2" hex products from a spline shaft motor. Sold in packs of 4.
Includes rounded edges allowing it to interface with 13.75mm ID bearings or 1/2" ID hex bearings.
Made from 4140 Steel.
Weight: .041 lbs
The CIM motor is a tried and true FIRST Robotics Competition workhorse motor. This brushed DC motor is 2.5 inches in diameter and kicks out 337 watts of power.
Pinion Options:
The CIM motor shaft is 0.313 in. (8 mm) in diameter and 1.25 inches long. It features a 2 mm wide machine key slot allowing installation of any number of custom or off the shelf pinions such as those included with all of our CIM based gearboxes. Other options include a pre-attached 16 tooth pinion making the CIM ready to mate to a CIM Sport planetary gearbox or a pre-attached 15 tooth pinion preparing the CIM for an EVO Gearbox. Use either of these two options if you are planning on using either the CIM Sport or an EVO gearbox and don't want to install the press fit pinion yourself. All of our other CIM based gearboxes use a slip fit pinion & machine key and are easy for the end user to install.
Compatible Components:
Motor Etching
This turnbuckle chain tensioner integrates directly with #25 chain. Using a chain tool, the custom 1/4-20 link bolts replace a chain link and have the pin pushed back through it to become part of the chain. Then simply twist the center coupler to tighten or loosen the chain and tighten the jam nuts once your chain tension is perfect.
All parts are made of steel including the coupler and the custom chain link bolts are 1/4-20 thread for increased strength. One link bolt is left hand threaded and the other is right hand threaded, so take care not to mix them up if purchasing multiple sets.
Material: Steel, all of it.
These bearing options are perfect for supporting spline shafts. The bearings slide on easily in our testing.
Flanged version: 35mm ID x 47mm OD x 7mm overall width - 1.5mm thick flange - .070 lbs
Radial version: 35mm ID x 47mm OD x 7mm overall width - .065 lbs
Comes in both radial and flanged versions.
The 100mm Slim Mecanum Wheel Set comes with 2 left and 2 right, and steel ball bearings. With blue steel frame and black rollers. The wheel is comprised of 12 black rollers and is able to move in any direction. Rollers are set at 45° to the axis of rotation of the wheel.
Rollers are mounted with steel ball bearings, making the roll more fluent.
Wheel Specifications:
The following hubs (purchased seperately) will work with these wheels
IWS-2820M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors.
Purpose: IWS-2412M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors.
iCrimp Ferrule Crimping Tool Kit, AWG 23-10 Self-adjustable Ratchet Ferrule Crimper Plier c/w 770End Sleeve Ferrules Connector Terminals
This is the most basic robot interaction elements from the Stage in the 2024 FIRST® Robotics Competition CRESCENDO℠ presented by Haas.
NOTE: The version we are selling does not include the surrounding structure, only the 3 flap assemblies, the polycarbonate sheet on top that locates the Microphones, and 3 chain kits. Teams will need to provide their own truss and surrounding structure to use this product effectively.
AprilTag stickers and plates are NOT included in this product but can be purchaced separately.
Included Components:
Usually Ships in 1 to 2 Weeks