S25-22HA-500K Aluminum Sprocket

#25 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #25
• Pitch: 0.250 inch
• Weight: 0.01 lbs

These connecting chain attachment links, also known as K-links, are perfect for securing components that need movement, to a chain. These versions were specifically designed by AndyMark to interface with common FRC and FTC products. The #35 chain version is designed for #10 hardware on a 1 on. hole spacing. The #25 chain version is designed for #6 hardware with 16 mm (5/8 in.) hole spacing. Both versions make it much easier to interface chain to elevator systems than ever before. They can also be used in conveyor systems to move items around inside your robot. 

Specifications

• Chain Size: #25, #35
• Hole Size: #25: 0.150 in., #35: 0.201 in.
• Hole Spacing: #25: 16 mm, #35: 1.00 in.
• Load Capacity : #25: 150lb, #35: 300lb
• Material: Steel
• Pitch: #25: 0.250 in., #35: 0.375 in.
• Weight: 0.01 lbs

Documents

Layout Print(s)

am-4181_25 25 Chain Attachment Link.PDF

am-4181_35 35 Chain Attachment Link.PDF

CAD File(s)

am-4181_35 35 Chain Attachment Link.STEP

am-4181_25 25 Chain Attachment Link.STEP

This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment.

Specifications:

• Material: 2024 Aluminum
• Bore: 0.500 in.
• Outside Diameter: 0.984 in.
• Thickness: 0.236 in.
• Weight: 0.017 Pounds
• Clamping Screws: M2 5x8 SHCS

#25 Roller Chain, 10 feet 

Product Overview:

• Material: Steel
• Specification: ASME/ANSI B29.1
• Style: Riveted - Single Strand
• Type: Roller Chain
• Size: #25
• Pitch: 1/4"
• Weight: 1.014 lbs

#25 Half Link. Also known as #25 Offset Link. 

Specifications:

• Material: Steel
• Style: Roller Chain with interted pin
• Type: Half Link
• Size: #25
• Pitch: 0.25 inch
• Weight: 0.01 lbs

Product Overview: 

• 1/2" id, shielded, flanged ball bearing 

Specifications:

• Inside Diameter: 0.500 inch
• Outside Diameter: 1.125 inch
• Flange Thickness: 0.062 inch
• Overall Thickness: 0.312 inch
• Weight: 0.052 pounds
• Material: Steel

22 tooth, 25 series
 

Specifications:

• Bore: 0.25 in.
• Hub Diameter: 1.123 in.
• Material: 7075 aluminum
• Outside Diameter: 1.87 in.
• Overall Hub And Sprocket Width: 0.405 in.
• Pitch Diameter: 1.76 in.
• Sprocket Width: 0.123 in.
• Weight: 0.05 lbs
   

The easy way to change the length of your #25 chain. (Chain not included)

This simple bracket handles so many of your mounting needs! Mount motors or gearboxes anywhere and make axle supports with bearings - it's a do-it-all, put-it-anywhere bearing and motor mount bracket.

Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to hold a standard 1.125 inch outside diameter bearing.

Examples of motors with a 2 in. diameter bolt circle:

• 2.5 in. CIM Motor
• NEO Brushless Motor

Examples of gearboxes with a 2 in. diameter bolt circle

• PG Series Gearboxes
• 57 Sport Gearbox
• CIM Sport Gearbox
• Falcon Sport Gearbox
• DeCIMate Gearbox

Specifications

• Depth: 1 in.
• Height: 2.679 in.
• Length: 3.5 in.
• Material: 5052 Aluminum
• Thickness: 0.13 in.
• Weight: 0.104 lbs

Documents

Layout Print(s)

am-4244 1IN Pitch Bent Motor and Bearing Bracket REV2.PDF

CAD File(s)

am-4244 1IN Bent Bearing Side Mount Gusset.STEP