Close
Main Categories
    Filters
    Preferences
    Search

    SB50 to PP45 XT30 and XT60 Adapter Cable

    MFR Part #: am-2070b
    $30.00
    Availability: 3 in stock

    This handy cable allows you to make a variety of connections. XT30 or XT60 devices can be connected to SB50 or PP45, or you can ignore the XT connectors and use it to go between SB50 or PP45. 

     

    The XT connections are a male XT60 cable with a removable adapter (am-4092) to convert it to male XT30 to receive a REV FTC battery. 

     

    Specifications

     

    • Gauge: 12
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    • Bad
    • Excellent

    This handy cable allows you to make a variety of connections. XT30 or XT60 devices can be connected to SB50 or PP45, or you can ignore the XT connectors and use it to go between SB50 or PP45. 

     

    The XT connections are a male XT60 cable with a removable adapter (am-4092) to convert it to male XT30 to receive a REV FTC battery. 

     

    Specifications

     

    • Gauge: 12
    Customers who bought this item also bought

    4" Stealth Wheel, 1/2 Hex Bore, Orange,40A Durometer (am-2647_orange)

    #am-2647_orange
    $12.00
    (70 In stock)

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

    am-3156 2IN 8mm Stealth Wheel REV3.PDF

    am-3436 2in 375Hex Stealth Wheel REV3.PDF

    am-3155 2in 500Hex Stealth Wheel REV3.PDF

    am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

    am-2648 4IN 8mm Stealth Wheel REV5.PDF

    am-3435 4in 375Hex Stealth Wheel REV3.PDF

    am-2647 4in 500Hex Stealth Wheel REV3.PDF

    CAD File(s)

    am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

    am-3156 2IN 8mm Stealth Wheel.STEP

    am-3436 2IN 375Hex Stealth Wheel REV2.STEP

    am-3155 2IN 500Hex Stealth Wheel REV2.STEP

    am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

    am-2647 4inWheel 500 Hex REV2.STEP

    am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

    am-2648 4inWheel 8mm Hub REV2.STEP

    4" Compliant Wheel, 1/2" Hex Bore, 40A Durometer, Orange

    #am-3480_orange
    $14.50
    (17 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

    Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, ⠀Polycarbonate
    • Maximum RPM: 3000-9000
    • Weight: 0.228 - 0.269 Lbs
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3562 4IN 375Hex Compliant Wheel REV3.PDF

    am-3563 4IN 8mm Compliant Wheel REV4.PDF

    am-3480 4IN 500Hex Compliant Wheel REV3.PDF

    am-4538 4IN 5mm Hex Compliant Wheel.PDF

    CAD File(s)

    am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

    am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

    am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

    am-4538 4IN 5mm Hex Compliant Wheel.STEP

    Guide(s)

    4 inch Compliant Wheel Expansion.pdf

    2x2x10 mm Machine Key, steel

    #am-1121
    $1.08
    (In stock)

    Machine Key, steel. Used in 2.5" CIM Motor shafts. 

    Specifications:

    • Width: 2mm (0.078 inch)
    • Length: 10mm (0.394 inch)
    • Weight: 0.0008 pounds

    1 in. 8 mm to 1/2 in. Hex Shaft Adapter

    #am-0588_long
    $16.91
    (In stock)

    This adapter converts an 8 mm keyed shaft to 1/2 in. hex. The keyway is 2 mm wide. This allows you to adapt the output of a motor or gearbox like the CIM Motor (am-0255) to any of our hubs or wheels with a 1/2 in. hex bore. You'll need a 2 mm machine key (am-1121) to complete the assembly and transmit torque from the motor. 

     

    This adapter is no longer available in the 0.75 in. length.

     

    Specifications

    • Bore: 8 mm Round
    • Keyway Width: 2 mm
    • Length: 0.5 in., 1 in.
    • Material: Steel
    • Weight: 0.03 lbs
    • Width: 0.497 - 0.499 in.

    Retainer Clip, 8mm id

    #am-0033
    $0.38
    (In stock)

    This retainer clip is used to hold objects (such as gears) in place on shafts. 

    Example: This product can be used to hold a gear onto a CIM motor shaft. 

    Specification: 

    • Material: Steel
    • Inner Diameter: 8mm
    • Outer Diameter: 15mm
    • Weight: Less than 0.001 lbs

    Fitting, Y, Brass, 1/8" NPT, 2 F, 1 M

    #am-2186
    $6.15
    (In stock)

    This is a Nickel plated Brass "Y" union with two (2) Female connections with 1/8 NPT thread and one (1) male connection at 1/8 NPT.

    Specifications:

    • Weight: 0.05 lbs
    • Width: 1.54 in
    • Height: 0.51 in
    • Depth: 1.09 in
    • Material: Brass with nickel plating
    • Ports: 2 Female 1/8 NPT, 1 male 1/8 NPT
    • Pressure range: 0-250 psi