This four gauge power cable is used to connect a 120 Amp Breaker (am-0282) to a Power Distribution Panel (am-2856). This multi-strand wire is securely crimped and protected with heat shrink tubing. The tip-to-tip length is approximately five inches. This cable is used in the 4 Gauge Robot Power Cable Kit. Both end connectors of cable are crimped with a 6-ton pneumatic linkage crimping tool. Specifications:
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
This is a 25 foot section of a twisted pair of 22 AWG wire.
Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. The gyro has built-in temperature compensation. Pigeon provides a heading by sensor fusing all 9 measurements. It can be connected to the Talon SRX for power and communication via UART, or it can be wired to the CAN bus while powered from a separate 12V source. Pigeon has built-in compass compensation for hard-iron, soft-iron, and physical tilt. The Pigeon 2.0 eliminates the need for on-boot calibration and temperature calibration and does not require stillness upon boot-up.