This is a set of four AndyMark Mecanum wheels, sold in unassembled kits. All four wheels use the same parts, you just assemble them in different configurations to create two left-handed and two right-handed wheels. With a load capacity of 50 pounds per set of four, these wheels are perfect for a smaller robot like the ones that compete in FIRST Tech Challenge. If your robot is going to be carrying around more than that, like most FIRST Robotics Competition robots do, check out the 4" HD Mecanum Set, (am-3067). Here is where you can find replacement rollers: http://www.andymark.com/product-p/am-2539.htm Specifications:
Included Hardware:
Usage: This wheel is designed to directly mount to any of our Nubs for gearbox attachment. To use with Axle and Hub:
This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load. This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.
Specifications:
This 20 Amp fuse is used in FIRST Tech Challenge batteries and the FIRST Robotics Competition Power Distribution Panel (am-2856). Specifications:
The MINI® Fuse is the standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high temperatures in adverse environments makes the MINI® Fuse of recommended choice for protection.
This mini fuse can be used in our Power Pole Distribution Board (am-3699), as well as a replacement in the Power Distribution Panel (am-2856)
Omni-directional wheels in the smallest diameter offered by any common FIRST Robotics Competition or FIRST Tech Challenge supplier.
These 50 mm / 2 inch omni wheels features two different durometers:
They also have a standard 14 mm Hex Bore, letting you choose between 3 different bores:
Stack several of these wheels on a shaft to craft an unstoppable intake system for your robot that can be used to center game pieces.
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.
Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise. Specifications:
Here is a packet of red tacky grease used to lubricate gearboxes. This grease sticks well to gears and does not sling off as the gears spin. Although it looks like raspberry jam, don't put it on your churro! Specifications:
These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. This product includes the correct size washers to retain items along the hex shaft, as well as a thread-patch 8-32 screw to be used in conjunction with spacers included with the Falcon 500 motor to retain motion hardware.
This is the Rope used in the AndyMark Climber in a Box. With a tensile strength of 2,500 lbs and a 1/8 in. thickness, this rope is perfect for an FRC elevator or winch system (or whatever else you find it to be useful for. It's a strong rope. You can do a lot with it.
Over the past several years, many teams have started using lights to aid their aiming from the far end of the field. Whether you call it a photon cannon, a flashlight, or something else, being able to align a beam of light to a field element is a fast way for your drivers to find the sweet spot for shooting or other actions from a distance. This light, originally used on motorcycles, comes with a convenient mounting bracket for easy installation. This kit comes with 7 colored filters to insert behind the lens. Replacement filters are available, as is the target light alone. Specifications: