The MINI® Fuse is the standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high temperatures in adverse environments makes the MINI® Fuse of recommended choice for protection.
This mini fuse can be used in our Power Pole Distribution Board (am-3699), as well as a replacement in the Power Distribution Panel (am-2856)
This 20 Amp fuse is used in FIRST Tech Challenge batteries and the FIRST Robotics Competition Power Distribution Panel (am-2856). Specifications:
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the PRO-CRIMP Crimp Tool (am-3326).
Snap action breakers are used commonly in mobile robot applications such as FIRST Robotics Competition power distribution boards. We offer several amperage versions.
This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load. This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.
Specifications:
Each CONE (am-4700_syc) is a yellow 1 ft. ¹³⁄₁₆ in. (~33 cm) tall rubber marker cone and weighs 1lb 7oz (~653 g). Each CONE has an 8⅜ in. (~21 cm) +/- ⅛in. (~3 mm) square base with ¼ in. (~7 mm) tall feet.
Each CUBE (am-4700_bpc) is made of purple PVC fabric and is marked with a FIRST logo. The CUBE is a cube-like shape, inflated to 9 ½ in. (~24 cm) +/- ¼ in. (~6 mm) as measured from face to face, but these ship deflated. A CUBE has rounded corners, may not have flat surfaces, and the length, width, and height of the sides may not be equal dimensions. A CUBE weighs 2.5 oz (~71 g). The Cube Measurement Jig (am-4700_cmj) is a tool developed by FIRST to calibrate CUBE inflation at events. The appropriate range for CUBE inflation is between when the cube can lift the jig off the ground due to it's inflation, and when the cube touches both sides of the jig at the same time. The total weight of the jig is important in determining the minimum bound.
Anderson Power Products Connector with 2 contacts. Specifications:
Included Hardware:
You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.
Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.
Layout Print(s)
am-3946 3IN 375Hex Compliant Wheel REV3.PDF
am-3945 3IN 500Hex Compliant Wheel REV3.PDF
am-4537 3in 5mm Hex Molded Compliant Wheel.PDF
CAD File(s)
am-3946 3IN 375Hex Compliant Wheel REV 3.STEP
am-3945 3IN 500Hex Compliant Wheel REV 3.STEP
am-4537 3in 5mm Hex Molded Compliant Wheel.STEP