Pneumatic fitting with M5 threads and 1/4" push-in tubing port This fitting screws into a CKD single or double solenoid valve. Specifications:
This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!
The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.
CAD File(s)
am-3914_35 35 Chain Tensioner.STEP
Layout Print(s)
am-3914_35 #35 Chain Inline Tensioner.PDF
This is an double solenoid, air-piloted, compact valve made by CKD. It's great for efficiently providing air to a small to medium sized actuator on mobile robots.
In order to make this work, you will also need three (3) M5 fittings (NOT INCLUDED) and some tubing (also NOT INCLUDED).
Link to CKD valve catalog
CKD part number: 4GA120R-M5-4
This is an single solenoid, air-piloted, compact valve made by CKD. It's great for efficiently providing air to a small to medium sized actuator on mobile robots.
CKD part number: 4GA110R-M5-4
This is a push-to-connect "Y" fitting. Specifications:
#35 Roller Chain, 10 feet Specifications:
NOTE: This product is not included in any Sales or Discounts.
The Voltage Regulator Module (VRM) is a DC to DC convertor that is capable of both boost and buck voltage regulation. The device features two independent SEPIC (Single Ended Primary-inductor Converter) regulators allowing the input voltage to be above or below the desired output voltage. There are two regulators (one 5V and one 12V) each with two current limiting PTC’s (500mA and 2A). Reverse polarity protection is included.
The VRM has been used in the 2015-2021 FIRST Robotics Competition Kit of Parts. As of Sept 10, 2020 according to FIRST blog these will continue to remain competition legal in future years. See the overview of the 2021 Controls system Please contact support at [email protected] for warranty issues or Return Merchandise Authorization (RMA) for this product.
VRM User Guide
am-2857 VRM.PDF
This is for the Pneumatic Control Module (aka PCM) being used in the 2015 through 2021 FIRST Robotics Competition Kit of Parts.
For an overview of the 2020 Controls system, please see: https://wpilib.screenstepslive.com/s/currentCS/m/kop.
The Pneumatic Control Module (aka PCM) from Cross the Road Electronics provides an easy all-in-one interface for pneumatic components.
This is a pneumatic push-to-connect union tee fitting. All three of the ports are push-to-connect 1/4" fittings. Specifications:
VIAIR 90C compressor (air pump) offers a light duty solution for smaller air requirements. These compact compressors and are meant to fill no larger than a 1.0 gallon air tank. VIAIR part number 00090 Specifications:
Hardware:
Fill Rate
Products to be used on:
For VIAIR compressor warranty replacements contact Ryan Shaw.
This is a blank cover fitting in where a valve would mount on the CKD manifold (am-3982). All 4 ports of the manifold are required to be covered by either a solenoid or by this cover.