Montures
This bracket allows attachment of an air cylinder to extrusion that has a 1 in. wide dimension such as Peanut or 2x1 box tube
This hardware kit mounts the SRX Magnetic Encoder (am-3445) to all Toughbox® Series Gearboxes that have a magnets in their shaft, as well as all EVO gearboxes. Look below to the instructional video for directions on how to use this kit.
Individual Loose Parts in this Kit:
This kit is the needed hardware to attach a 550 or 540 motor like our 9015
(am-0912) to a 57 Sport Gearbox.
Specifications:
Individual Components within this Bundle:
This kit is the needed hardware to attach an RS 775 motor such as our RedLine
(am-3775) to a 57 Sport Gearbox.
Specifications:
Individual Components within this Bundle:
This kit is the needed hardware to attach a CIM Motor (am-0225) to a CIM
Sport Gearbox.
Specifications:
Individual Components within this Bundle:
This spacer attaches to a side of the CIM Sport Gearbox. This spacer accounts for the difference in size between the CIM Motor and the gearbox housing, allowing the gearbox to be side mounted to a surface. The holes are sized to be counterbore for 10-32 socket head screws so the plate can be held to the gearbox with some screws and used as a spacer for other longer bolts to pass through it and thread into the side of the CIM Sport.
Specifications:
This is the upper sheet metal part for the AM14U Family Vertical Battery Mount (am-3964). It surrounds the battery and has a tab to bolt either the SB120 or SB50 robot side battery connector.
Specifications
This sheet metal part forms the bottom tray that supports the weight of the battery in the AM14U Family Vertical Battery Mount Kit (am-3964). It has a tab at the bottom that prevents the battery from shifting.
Specifications
Specifications
Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).
Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.
Specifications:
Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).
Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.
Specifications: