Panier

filtres

Menu personnel

préférences

Rechercher

Motor Driver and Control System Prototype Board (mySTEM 2)

The mySTEM 2™ Control & Project Board for NI myDAQ is an essential tool for the introduction of control systems. It is ideal for teaching and learning science, technology, engineering and mathematics. The mySTEM™ Project Board comes with learning resources that may be used by any beginner in the STEM field to gather data, make decisions and control output devices. It allows students to control the state and direction of four output channels that support a wide range of field devices. .

Allow you to immediately do some experiments. Additional Motors, encoders, lights, wiring, solenoids, electromagnets and any other component may be purchased separately. We recommend the Do Engineering Components Kit or visit the Spare Parts Store to create your own project.

Includes:

S-Motor
Mini Switch
resisters
wires
flat plugs

Note: mySTEM 2 Project Board comes with US Plug. You can easily use into different plug with common US->EU or other adapters. Additional Motors, encoders, lights, wiring, solenoids, electromagnets and any other component may be purchased separately.

# Pièce: 72050

$179.19

Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.

Quantité:

Aperçu
Commentaires

Get more out of myDAQ with the mySTEM™ Project Board
High quality STEM projects require the monitoring processes with sensors, making decisions and causing an appropriate output. NI myDAQ is an affordable, student-ready measurement and instrumentation device that allows students to create and monitor experiments. However, the signals generated by the myDAQ are very low power, the reason that the device is very affordable. In order to control large, high current output devices we have created the mySTEM™ Board miniSystem.

Key Benefits:

Connects NI myDAQ to larger, high current devices
Transforms myDAQ into a Programmable Action Controller
Allows for control of four separate output channels
Focus on signal processing and the logic of control
Supports creativity and exploring a wider range of solutions
Learning resources prepared by Tom White, distinguished Educator

For high school and post-secondary education environment, the mySTEM™ Board for the NI myDAQ and LabVIEW is the ideal tool for integrating teaching and learning science, technology, engineering, and mathematics. The mySTEM™ board comes with curriculum that may be used by any beginner in the STEM or Engineering field in order to gather data, make decisions and control output devices. This makes it an essential tool for the introduction to control systems.

Combined with the NI myDAQ and LabVIEW, the mySTEM™ board allows students to control the state and direction of four output channels. These channels can support a wide range of field devices. Students will be able to control DC, encoder, and stepper motors. The board can also be with relays, buzzers, solenoids, electromagnets, and any other device that utilizes Direct Current. This will allow students to expand the use of the myDAQ and Labview to make their own miniSystems as classroom projects and explore many career areas that are high paying and in high demand.

Main Features:

4 bidirectional output channels
Easily controlled with LabVIEW as the programming language
Open ended engineering miniSystem. Allows teachers to assign miniSystem projects in a wide variety of fields such as Controls, Robotics, Manufacturing,
Automation, pneumatics, hydraulics, counters, and PWM
Breadboard to allow the connection to a wide variety of readily available sensors and actuators from hundreds of independent vendors

Four output channels
The voltage of each output channel can be reversed to allow motors to run in two different directions
Supply voltage 6-24 Volts
US Plug (but you can adapt it with common plug adapter)
Auxiliary power connection
Diode protection
Output voltage 6-24 Volts
5V logic power supply
Selection of voltages available for powering active sensors
Thermal protection for overcurrent situations
On/Off switch
400 hole breadboard

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

TETRIX MAX Gripper Kit

#44609

$24.93

(15 En stock)

Add form and function to your TETRIX MAX robot with theTetrix Max; Gripper Kit. The integrated MAX hole pattern allows for a variety of mounting options, and the wide range will serve you well for picking up large items. The curved jaws and flat surfaces provide a more versatile gripping surface that can easily accommodate both round objects and flat objects. Removable gripper extension rails increase strength and versatility.

Tetrix Max Servo Extension

#39081

$7.25

Tetrix Max Servo Extension gives your servo a little more room to roam with this extension.

485 Servo Pack

#39197

$51.33

485 Servo Pack is one of the best choices for rugged robotic applications. This servo’s great performance and durability are a combination of karbonite gears, high-performance circuitry, and a ball bearing-supported output shaft. Karbonite gearing is nearly four times stronger than nylon gears and provides virtually wear-free performance. Standard rotational range is 90 degrees, but it can be operated to 180 degrees with controllers capable of generating a pulse range from 600 usec to 2400 usec. Produces nearly 84 oz-in of torque power.

Tetrix Prizm Robotics Controller

#43000

$299.00

(11 En stock)

The TETRIX PRIZM Robotics Controller is a fully integrated, programmable brain for your bot that features a variety of motor, servo, encoder, and sensor ports with convenient connectors that enable you to control your robot's behavior like never before. This controller offers the best of both worlds – a learning tool that is powerful yet easy to use. With PRIZM you can take learning to new heights by creating robots that are smarter, more precise, and as real world as it gets.

The controller is specifically developed for use with theTetrix Max; building system and comes with programming support for theArduino Software (IDE), which is compatible with Windows, Mac OS X 10.7 or newer, and Linux devices that have a USB port.

The PRIZM Robotics Controller features:

32 KB flash programmable memory
ATmega328P processor with Arduino Optiboot bootloader installed
4 digital sensor ports (D2 can be used as a serial port) and 3 analog sensor ports
1 I2C port, 1 USB programming port, 1 motor controller expansion port, and 2 quadrature encoder input ports
2 high-current DC motor control ports
6 standard control servo ports and 2 continuous rotation (CR) servo ports
Battery connection port (additional port used to daisy-chain power to other devices)
Programmable Start button (green) and a non-programmable Stop/Reset button (red)
Comes with USB cable, power switch, motor cables, and a Quick-Start Guide

Tetrix Max Battery Clips pkg of 2

#38009

$9.75

TETRIX MAX Battery Clips provide a safe and sturdy housing unit for the TETRIX battery pack.

Quantity: pkg of 2
Material: 7005 Aluminum

myDAQ with NI LabVIEW and Multisim - For Students Only

#781327-01

$359.00

(0 En stock)

National Instrument's NI myDAQ - Student with NI LabVIEW, and Multisim, is designed to give students the ability to work on engineering course work and experiment with projects hands-on anywhere, anytime. The NI myDAQ is a high-quality instrumentation device that gives students the power to prototype systems and test circuits outside of the classroom while improving comprehension with continuous reinforcement.

Schools may purchase the myDAQ for secondary schools from here

Basic Parts Kit for NI myDAQ

#CK-1000.

$122.94

This Basic Parts Kit for the NI myDAQ provides you with 100's of parts to aid you in your prototype needs. Perform experiments first hand and develop a greater understanding of key concepts.

VMX FRC Training Bot

#74000

Demander un devis

The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot. The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment. Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them!

This affordable solution is intended for:

FRC teams that want to learn and train on a smaller and more affordable robot,
Schools looking for a way to teach FRC robotics in the classroom.
Schools that want to teach coding in the classroom through robotics.

The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Advanced Robotics Controller which can be programmed in C++ and Java. VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).

Download BOM here

Tetrix Max Quarter-Scale HS-755HB Servo Motor with Horn

#39904

$57.75

TETRIX MAX Quarter-Scale HS-755HB Servo Motor with Horn offers a whopping 183 oz-inches of torque, 180-degree rotation, and superior strength and performance. Perfect for robot builds that require more power and durability. The servo features Karbonite gears that offer incredible toughness and strength. Attach this Quarter-Scale Servo to your TETRIX robot with ease with one of our new Quarter-Scale Servo Mounting Brackets.

Each servo includes one TETRIX Aluminum Servo Horn.

Tetrix Max Continuous Rotation Servo

#39177

$39.00

TETRIX MAX Continuous Rotation Servo enables precise movements of robot designs. Unlike other servos that have a limited range of motion, this servo rotates continuously in either direction – as needed for wheels. This high-quality servo is designed with a wide neutral dead band to eliminate the “creep” that occurs in many other continuous rotation servos. Dual ball bearings on the output shaft ensure long-lasting performance.

Note: This servo does not have position feedback.