Pneumatique
This is an air pressure regulator manufactured by Norgren. Also included in this part is the steel mounting bracket and a plastic mounting nut.
Specifications:
This is a brass relief valve used in low-volume air tanks and pumps to retard excessive pressure buildup.
Specifications:
Be sure all your threaded pneumatic connections are sealed properly with this
teflon tape. Standard grade PTFE tape used in all your robot pneumatics.
Specifications:
This is the next step in a pneumatics package, which gives you all the parts you need for an entire system to push 7" stroke cylinders (included). And creates pressurized air in a safe, manageable manner for mobile robots.
Entire list of Hardware:
This cylinder, manufactured by phd, Inc, is robust and features a 3/4" diameter bore and a 4" stroke. The head, cap, and tube are all made of strong, lightweight aluminum. The rod is made from chrome-plated steel, and includes standard cushions to reduce end of travel impact.
We also provide a 2" and 6" stroke version of this same cylinder.
Specifications:
This kit of parts makes up a system which creates pressurized air in a safe, manageable manner for mobile robots.
This is an assortment of lightweight parts picked specifically to work well together in an efficient manner. All of these parts together weigh under 6 pounds. These parts collectively make up a pneumatic system, sending air out to the valves and cylinders. These are all of the parts you need to get controlled, pressurized air sent to your valve(s) of choice.
Hardware:
NOTE: This product is not included in any Sales or Discounts.
This is for the Pneumatic Control Module (aka PCM) being used in the 2015 through 2021 FIRST Robotics Competition Kit of Parts.
For an overview of the 2020 Controls system, please see: https://wpilib.screenstepslive.com/s/currentCS/m/kop.
The Pneumatic Control Module (aka PCM) from Cross the Road Electronics provides an easy all-in-one interface for pneumatic components.
This is a pneumatic push-to-connect male elbow fitting. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
Specifications:
This is a pneumatic push-to-connect male straight fitting. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
Specifications:
This is a pneumatic push-to-connect male straight fitting. The port is a 1/4" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
Specifications:
This is a pneumatic push-to-connect union tee fitting. All three of the ports are push-to-connect 1/4" fittings.
Specifications:
This pneumatic fittings kit is perfect for your first time using pneumatics or restocking your current supply. It contains many of the most commonly used fittings as well as a few extras that always come in handy when re-configuring or repairing.
Individual Components within this Bundle:
This is a plastic bracket for mounting the Clippard Air Tank (am-2649).
If you plan to use this bracket to hold of these am-2649 tanks, we recommend using two brackets for each tank.
Specifications:
For Pro Charging Systems, warranty replacements contact Richard Harmon.
This is a miniature pressure gauge with 1/8 in. NPT threads perfect for lightweight pneumatic systems where you need to mount a pressure gauge to a hard fitting. This pressure gauge is significantly reduced in volume and weight compared to the classic gauges used in FRC. This lets you take advantage of every last cubic inch and ounce on your robot.
This is a miniature pressure gauge with a male 1/4 in. push to connect fitting making it easy to install in any of our push to connect fittings to get exactily the layout you are looking for. It can even be installed in the end of one of our air tanks where you might usually put a plug. This pressure gauge is significantly reduced in volume and weight compared to the classic gauges used in FRC. This lets you take advantage of every last cubic inch and ounce on your robot.
This pneumatic pressure gauge features a 1/8" NPT male fitting. This part is used to read the overall pressure for your pneumatic system.
Specifications: