Precision Potentiometer, 10turn 5Kohms

Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more. 

The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!

Learn how to attach these hubs to AndyMark wheels by watching this video!

There are 94 of these gamepieces used in the FIRST® Tech Challenge game, CENTERSTAGE℠ presented by RTX. A full field set is made up of 64 White, 10 Green, 10 Purple, and 10 Yellow Pixels. These lightweight hexagons make for a perfectly challenging piece for teams to manipulate in this game!

There are 94 of these gamepieces used in the FIRST® Tech Challenge game, CENTERSTAGE℠ presented by RTX. A full field set is made up of 64 White, 10 Green, 10 Purple, and 10 Yellow Pixels. These lightweight hexagons make for a perfectly challenging piece for teams to manipulate in this game!

Assembly Required.
The Bosch Seat Motor DIO kit comes with all the additional parts needed to connect the Bosch Seat Motor and Harness Cable (am-3564) to the robo-RIO DIO, providing usable feedback. 

Check out the downloads tab for a full assembly guide. 

Warning! 
The adhesive inside the shrink tube permanently seals the electronics. Please test your circuit and confirm operation before using the provided shrink tube!

Specifications: 

• Length: 1.9 in
• Width : 0.6 in
• Height: 0.4 in
• Weight: 0.0115 lbs

Individual Components within this Bundle:

• 1 x 180 Ohmn Resistor
• 1 x 220 Ohmn Resistor
• 1 x 5.6k Ohm Resistor
• 1 x Adhesive Shrink Tube
• 2 x PNP Transistors
• 1 x Female Connector
• 1 x PCB