Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Stealth Wheels 5mm Hex Bore, 3 Inch Dia, 35A Durometer Green

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 3 in. and 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    # Pièce: am-4719_green
    $9.00
    Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 3 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 3 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.
    Les clients ayant acheté cet article ont également acheté

    Stud-Mount Ball Caster, 1" Steel Ball, 1/4"-20 Thread

    #am-2441
    $9.23
    (0 En stock)

    Stud-Mount Ball Transfer, 1" Steel Ball, 1/4"-20 Thread

    Specifications:

    • Ball Diameter: 1" inches
    • Width Across Middle: 1-3/4 inches
    • Thread Length: 1/2"
    • Body Material: Steel
    • Load Capacity: 75 pounds
    • Weight: 0.33 pounds

    288mm Channel pkg of 2

    #39068
    $32.99
    (En stock)

    288mm Channel are heavy-duty aluminum channel pieces that can be cut to custom lengths with a metal-cutting blade.

    • Size: 288 mm x 32 mm x 32 mm
    • Quantity: pkg of 2
    • Material: 7005 Aluminum

    160mm Channel pkg of 2

    #39067
    $29.52

    160mm Channel  can also be cut to custom lengths with a metal-cutting blade.

    • Size: 160 mm x 32 mm x 32 mm
    • Material: 7005 Aluminum

    TETRIX MAX 12-Volt Rechargeable 3,000 mAh NiMH Battery Pack

    #39057
    $79.95
    (242 En stock)

    Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

     

    (THIS BATTERY IS FTC LEGAL)

    Tetrix Max Linear Slide Pack

    #39300
    $38.20
    (1 En stock)

    TETRIX MAX Linear Slide Pack adds a linear-motion component to your robotics project. The rack gears – used individually or laid end to end – are attached to a TETRIX channel. The slide blocks and pinion gear go onto another channel that slides across the rack gears when powered by gears and a DC motor with motor mount, sold separately.

    Includes four GF nylon rack gears, four GF nylon slide blocks, and one aluminum pinion gear.

    • Size: Gear Racks are five inches long
    • Outside Diameter: pinion gear 20.8 mm
    • Number of Teeth: 28
    • Material: 7005 Aluminum pinion gear; nylon rack gears

    Tetrix Max Torquenado Motor Pack

    #45121
    $277.82
    (1 En stock)