Toughbox Mini Toughbox Mini - 12.75:1 | 14 | 50 | 14 | 50 | Angled

Soyez le premier a tester ce produit

All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease,am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

Product Overview:
This is the Toughbox Mini. It is similar to the Toughbox, but it is slightly smaller in profile and is 1/2 pound lighter. The Toughbox Mini uses the same interior parts as our standard Toughbox, and is shipped un-assembled.

Toughbox Mini accepts two (or one) 2.5 inch CIM Motors (not included). Hardware is included with the gearbox for attaching two of these motors.

Specifications:

Overall Ratio: 12.75:1 (standard)
Gear material: 4140 steel
Gear type: spur gears, 20 dp, 14.5 degree pressure angle
Gearbox housing material: Nylon 6/6 with long fiberglass fill
Output shaft: 1/2 inch diameter, with 1/8" keyway, 4140 steel
Weight: 1.95 pounds
Input Gear: CIM Gear, 14 tooth, 0.315 inch bore w/ 2mm keyway
Large Cluster Gear: 50 tooth, 3/8 inch hex bore
Small Cluster Gear: 14 tooth, 3/8 inch hex bore
Large Output Gear: 50 tooth, 1/2 inch hex bore

# Pièce: am-0654

$136.84

Disponibilité: En stock

Quantité:

Aperçu
Commentaires

Weight Reduction with Optional Parts:

Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.

Additional Encoder:

An optional am-3132 Encoder can be purchased and added to this Toughbox.

Optional Output Shafts:

T-Box Long Output Shaft (steel), which is 3.5 inches longer than the standard output shaft
Toughbox Hex Output Shaft* (steel)
Toughbox Hex Long Output Shaft* (steel)
Toughbox Hex Output Shaft* (7175 aluminum)
Toughbox Hex Long Output Shaft* (7175 aluminum)

Aluminum Hex Output Shafts:
* The Toughbox can use a hex output shaft, but a FR8ZZ-HexHD bearing (am-2986) MUST be ordered SEPARATELY to replace the FR8ZZ bearing supporting the output shaft.

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

Weight Reduction with Optional Parts:

Aluminum Large Cluster Gear can replace the standard steel 50 Tooth Large Cluster Gear.
Aluminum Large Output Gear can replace the standard steel 50 Tooth Large Output Gear.

Additional Encoder:

An optional am-3132 Encoder can be purchased and added to this Toughbox.

Optional Output Shafts:

T-Box Long Output Shaft (steel), which is 3.5 inches longer than the standard output shaft
Toughbox Hex Output Shaft* (steel)
Toughbox Hex Long Output Shaft* (steel)
Toughbox Hex Output Shaft* (7175 aluminum)
Toughbox Hex Long Output Shaft* (7175 aluminum)

Aluminum Hex Output Shafts:
* The Toughbox can use a hex output shaft, but a FR8ZZ-HexHD bearing (am-2986) MUST be ordered SEPARATELY to replace the FR8ZZ bearing supporting the output shaft.