Close
Main Categories
    Filters
    Preferences
    Search

    6 Gauge Wire - 10 ft length, Red, Flexible EPDM

    Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

     

    Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

     

    SKUs:

    • am-2840 - PVC Insulated Black
    • am-2841 - PVC Insulated Red
    • am-4485_black - EPDM Insulated Black
    • am-4485_red - EPDM Insulated Red

     

    Specifications

    • Color: Black and Red
    • Current: 115A for Silicone Wire
    • Diameter: 0.32 in. Silicone Wire
    • Gauge: 6
    • Insulation: Flexible EPDM, Rigid PVC
    • Length: 10 Feet (+/- 1 in.)
    • Operating Temperature: -59°F to 257°F for PVC Wire
    • Strand Count: 49 Inside PVC, 263 Inside EPDM
    • Voltage: 60V for PVC Wire
    MFR Part #: am-4485_red
    $30.00
    Write your own review
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    Customers who bought this item also bought

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    ( 247 In stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    SB-50A Anderson Powerpole Connector with Contacts

    #am-0546
    $7.00
    (In stock)

    Anderson Power Products Connector with 2 contacts. 

    Specifications:

    • Material (APP Connector): Red Plastic
    • Weight: 0.060
    • Mounting holes: 0.15" diameter, 3/4" apart

    Included Hardware:

    • One - SB-50A red plastic connector
    • Two - Anderson Power Products crimp contacts (sized for 6 gauge wire)

    WAGO 221 Series InLine Splicing Connector with Lever

    #am-4728
    $1.00
    ( 818 In stock)

    This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.

    6 Gauge Wire - 10 ft length, Black, Flexible EPDM

    #am-4485_black
    $30.00

    Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

     

    Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

     

    SKUs:

    • am-2840 - PVC Insulated Black
    • am-2841 - PVC Insulated Red
    • am-4485_black - EPDM Insulated Black
    • am-4485_red - EPDM Insulated Red

     

    Specifications

    • Color: Black and Red
    • Current: 115A for Silicone Wire
    • Diameter: 0.32 in. Silicone Wire
    • Gauge: 6
    • Insulation: Flexible EPDM, Rigid PVC
    • Length: 10 Feet (+/- 1 in.)
    • Operating Temperature: -59°F to 257°F for PVC Wire
    • Strand Count: 49 Inside PVC, 263 Inside EPDM
    • Voltage: 60V for PVC Wire

    3 in. Compliant Wheel, 1/2 Inch Hex, 40A Durometer, Orange

    #am-3945_orange
    $11.00
    ( 0 In stock)

    You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.



    Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.

     

    Specifications

     

    • Bore: 0.375 in. Hex, 0.5 in. Hex, 5 mm Hex
    • Color: Green, Black, Blue, Black
    • Core Material: Polycarbonate
    • Diameter: 3 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.12 lbs
    • Overall Width: 1 in.

     

    Documents

     

    Layout Print(s)

    am-3946 3IN 375Hex Compliant Wheel REV3.PDF

    am-3945 3IN 500Hex Compliant Wheel REV3.PDF

    am-4537 3in 5mm Hex Molded Compliant Wheel.PDF

    CAD File(s)

    am-3946 3IN 375Hex Compliant Wheel REV 3.STEP

    am-3945 3IN 500Hex Compliant Wheel REV 3.STEP

    am-4537 3in 5mm Hex Molded Compliant Wheel.STEP

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $14.50
    ( 61 In stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

      Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

       

       

      Specifications

       

      • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
      • Diameter: 4 in.
      • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
      • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
      • Material: TPU, ⠀Polycarbonate
      • Maximum RPM: 3000-9000
      • Weight: 0.228 - 0.269 Lbs
      • Width: 1 in.

      Documents

      Layout Print(s)

      am-3562 4IN 375Hex Compliant Wheel REV3.PDF

      am-3563 4IN 8mm Compliant Wheel REV4.PDF

      am-3480 4IN 500Hex Compliant Wheel REV3.PDF

      am-4538 4IN 5mm Hex Compliant Wheel.PDF

      CAD File(s)

      am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

      am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

      am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

      am-4538 4IN 5mm Hex Compliant Wheel.STEP

      Guide(s)

      4 inch Compliant Wheel Expansion.pdf

      4" Compliant Wheel, 1/2" Hex Bore, 50A Durometer, Blue

      #am-3480_blue
      $14.50
      (In stock)

      Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



      Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

       

        Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

         

         

        Specifications

        • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
        • Diameter: 4 in.
        • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
        • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
        • Material: TPU, ⠀Polycarbonate
        • Maximum RPM: 3000-9000
        • Weight: 0.228 - 0.269 Lbs
        • Width: 1 in.

        Documents

        Layout Print(s)

        am-3562 4IN 375Hex Compliant Wheel REV3.PDF

        am-3563 4IN 8mm Compliant Wheel REV4.PDF

        am-3480 4IN 500Hex Compliant Wheel REV3.PDF

        am-4538 4IN 5mm Hex Compliant Wheel.PDF

        CAD File(s)

        am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

        am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

        am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

        am-4538 4IN 5mm Hex Compliant Wheel.STEP

        Guide(s)

        4 inch Compliant Wheel Expansion.pdf

        574 ml Air Reservoir with Push Connect Fittings

        #am-2649
        $30.00
        ( 19 In stock)

        This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

        This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

        Specifications:

        • Manufacturer: Clippard
        • Weight: 0.64 lbs
        • Capacity: 574 ml (35 cu. inch)
        • Ports: Two 1/4" od tube push-in fittings
        • Maximum pressure: 125 psig
        • Temperature rating: 35 to 100 F
        • Length: 12.25"
        • Diameter: 2.5" (@ main tank), 2.75" max


        A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

        Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).