This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

Specifications

• Gauge: 06 AWG
• Hole Size For Stud: 0.25 in.
• Material: Copper
• Overall Length: 2.03 in.
• Tongue Width: 0.48 in.
• Weight: 0.01 lbs
• Wire Strip Length: 1.18 in.

Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

SKUs:

• am-2840 - PVC Insulated Black
• am-2841 - PVC Insulated Red
• am-4485_black - EPDM Insulated Black
• am-4485_red - EPDM Insulated Red

Specifications

• Color: Black and Red
• Current: 115A for Silicone Wire
• Diameter: 0.32 in. Silicone Wire
• Gauge: 6
• Insulation: Flexible EPDM, Rigid PVC
• Length: 10 Feet (+/- 1 in.)
• Operating Temperature: -59°F to 257°F for PVC Wire
• Strand Count: 49 Inside PVC, 263 Inside EPDM
• Voltage: 60V for PVC Wire

Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

SKUs:

• am-2840 - PVC Insulated Black
• am-2841 - PVC Insulated Red
• am-4485_black - EPDM Insulated Black
• am-4485_red - EPDM Insulated Red

Specifications

• Color: Black and Red
• Current: 115A for Silicone Wire
• Diameter: 0.32 in. Silicone Wire
• Gauge: 6
• Insulation: Flexible EPDM, Rigid PVC
• Length: 10 Feet (+/- 1 in.)
• Operating Temperature: -59°F to 257°F for PVC Wire
• Strand Count: 49 Inside PVC, 263 Inside EPDM
• Voltage: 60V for PVC Wire

2-wire cable, 24 inch (am-2133) 

This is a basic 2-pin header cable that could be used for a variety of applications. 

Specifications:

• Pins: 2 pin
• Wires: 2 wire
• Length: 24 inches
• Weight: 0.020 pounds

This is 12 GA bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.

If you are looking for a much more flexible wire or wire that is not bonded check out our Silicone Wire. 
 

* - This is also known as zip cord or zip wire.

Specifications

• Gauge: 12 AWG
• Length: 25 feet
• Total Weight: 1.2 lbs
• Weight: 0.05 lbs/ft
• Wire Jacketing: black & red (bonded together)

This is 18 AWG (gauge) bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.
 

* - This is also known as zip cord or zip wire.

Specifications

• Gauge: 18 AWG
• Length: 25 feet
• Total Weight: lbs
• Weight: 0.45 lbs/ft
• Wire Jacketing: black & red (bonded together)

This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

Specifications:

• Weight: pounds
• Length: Approximately 24 inches
• Connector Type: Anderson PowerPole PP45
• Gauge: 12 bonded

This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.
 

Note: Product received may vary from image shown. Some cables may ship with a separate protective housing on the male end of the cable. If this housing interferes with your application it can be removed with a small screwdriver gently inserted between the connector and the housing.

Specifications

• Length: 12 in.
• Weight: 0.024 lbs
• Wire Colors: white, red, black

This is a PWM cable, also known as a "servo extension cable." 22 gauge wire is used in these cables. Universal servo connectors are on each end, with a female connector on one end and a male on the other.

Note: Product received may vary from image shown. Some cables may ship with a separate protective housing on the male end of the cable. If this housing interferes with your application it can be removed with a small screwdriver gently inserted between the connector and the housing.

Specifications

• Gauge: 22 AWG
• Length: 36 in.
• Weight: 0.046 lbs
• Wire Colors: white, red, black
• Wire Jacketing: black heat shrink tubing

Create your own custom length PWM cables with this kit. This kit allows you to make ends for custom length PWM cables, with a single cable up to 10ft long.  Not shown in the picture is that there is plenty of extra pins in case you damage a few, or want to remake.

Kit Includes:

• 1 - 10ft of 22AWG Bonded PWM cable, Black/Red/White (am-3162)
• 1 - PWM Male Connector (25 Housings, 100 Pins) (am-0943a)
• 1 - PWM Female Connector (25 Housings, 100 Pins) (am-2814a)

These 10 and 12 gauge silicone wire are the best things to happen to robot wiring! Both gauges offer high strand count in a flexible sheathing. This wire allows for tight turns in small spaces, allowing you to achieve cleanliness unlike anything seen before. This is the wiring you need to achieve satisfyingly clean robot wiring, like what FRC Team 1538 achieves every year, but it's also perfect for wire runs that have to move with mechanisms on your robot.

Each product on this page is a pack of 25 feet of red wire and 25 feet of black wire. Each color is separate but packaged together. This is not "zip cord" like our lower strand count wire.

Specifications

• Color: Black and Red
• Diameter: 0.18 in., 0.22 in.
• Gauge: 10, 12
• Insulation: Silicone Rubber
• Length: 25 Feet of Each Color
• Maximum Voltage: 600V
• Strand Count: 650+, 1000+
• Temperature Rating: -60 to 200 Celcius

These 10 and 12 gauge silicone wire are the best things to happen to robot wiring! Both gauges offer high strand count in a flexible sheathing. This wire allows for tight turns in small spaces, allowing you to achieve cleanliness unlike anything seen before. This is the wiring you need to achieve satisfyingly clean robot wiring, like what FRC Team 1538 achieves every year, but it's also perfect for wire runs that have to move with mechanisms on your robot.

Each product on this page is a pack of 25 feet of red wire and 25 feet of black wire. Each color is separate but packaged together. This is not "zip cord" like our lower strand count wire.

Specifications

• Color: Black and Red
• Diameter: 0.18 in., 0.22 in.
• Gauge: 10, 12
• Insulation: Silicone Rubber
• Length: 25 Feet of Each Color
• Maximum Voltage: 600V
• Strand Count: 650+, 1000+
• Temperature Rating: -60 to 200 Celcius

Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

SKUs:

• am-2840 - PVC Insulated Black
• am-2841 - PVC Insulated Red
• am-4485_black - EPDM Insulated Black
• am-4485_red - EPDM Insulated Red

Specifications

• Color: Black and Red
• Current: 115A for Silicone Wire
• Diameter: 0.32 in. Silicone Wire
• Gauge: 6
• Insulation: Flexible EPDM, Rigid PVC
• Length: 10 Feet (+/- 1 in.)
• Operating Temperature: -59°F to 257°F for PVC Wire
• Strand Count: 49 Inside PVC, 263 Inside EPDM
• Voltage: 60V for PVC Wire

Six gauge wire is great for large current draw applications such as battery cables and distribution between primary breakers and distribution boards. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Red jacketed cabling is typically used on the positive leg while black is used for ground wiring. Six gauge wires come in rigid PVC insulation or flexible EPDM. Pick your color and pick your insulation type and let your wiring dreams come true.

SKUs:

• am-2840 - PVC Insulated Black
• am-2841 - PVC Insulated Red
• am-4485_black - EPDM Insulated Black
• am-4485_red - EPDM Insulated Red

Specifications

• Color: Black and Red
• Current: 115A for Silicone Wire
• Diameter: 0.32 in. Silicone Wire
• Gauge: 6
• Insulation: Flexible EPDM, Rigid PVC
• Length: 10 Feet (+/- 1 in.)
• Operating Temperature: -59°F to 257°F for PVC Wire
• Strand Count: 49 Inside PVC, 263 Inside EPDM
• Voltage: 60V for PVC Wire

Four Gauge wire can be used for main power between your batteries, main breaker and power distribution on your FRC Robots. The thinner 6 gauge wire has been common for some time in competition robotics wiring, however, with this larger 4 gauge wire you can prolong breaker life thanks to lower resistance, larger, and more flexible wire. 

Specifications

• Color: Black, Red
• Conductor Diameter: 0.20 in.
• Current: 150A
• Diameter: 0.35 in.
• Gauge: 4
• Insulation: Flexible EPDM
• Insulation Thickness: 0.06 in.
• Length: 10 Feet
• Stranding: 370

Four Gauge wire can be used for main power between your batteries, main breaker and power distribution on your FRC Robots. The thinner 6 gauge wire has been common for some time in competition robotics wiring, however, with this larger 4 gauge wire you can prolong breaker life thanks to lower resistance, larger, and more flexible wire. 

Specifications

• Color: Black, Red
• Conductor Diameter: 0.20 in.
• Current: 150A
• Diameter: 0.35 in.
• Gauge: 4
• Insulation: Flexible EPDM
• Insulation Thickness: 0.06 in.
• Length: 10 Feet
• Stranding: 370