Gears | Studica Canada - Robotics, Automation Technology for Education and Industry

56T 20DP 4 Tooth Steel Dog Gear

#am-3491

$38.44

(In stock)

Specifications:

Tooth Count: 56
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.8"
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Weight: 0.30 Lbs

20 Tooth 32 DP 0.375 in. Round Bore Steel Gear for EVO Encoder

#am-3532

$15.00

(In stock)

This gear is a press fit gear specifically designed for the 2 Stage EVO Shifter Output shafts, as part of the encoder setup.

Specifications:

Tooth Count: 20
Diametral Pitch: 32
Pressure Angle: 20
Pitch Diameter: 0.625"
Face Width: 0.62"
Material: 1117 Steel
Bore: 0.372" Round
Weight: 0.03 Lbs

85T 32 DP 0.375" Hex Bore, Steel Gear

#am-3533

$27.68

(In stock)

Specifications:

Tooth Count: 85
Diametral Pitch: 32
Pressure Angle: 20
Pitch Diameter: 2.65"
Face Width: 0.50"
Material: 1117 Steel
Bore: 0.375" Hex

18T 20 DP 0.375" Hex Bore, Steel Gear

#am-3534

$18.45

(In stock)

Specifications:

Tooth Count: 18
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 0.9"
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex

25T 20 DP 0.500" Hex Bore, Steel Gear

#am-3535

$18.45

(4 In stock)

Specifications:

Tooth Count: 25
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.25"
Face Width: 0.5"
Material: 4140 Steel
Bore: 0.5" Hex

30 Tooth 20 DP 0.375" Hex Bore, Steel Gear

#am-3536

$21.53

(0 In stock)

Specifications:

Tooth Count: 30
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.5"
Face Width: 0.357"
Material: 4140 Steel
Bore: 0.375" Hex

34 Tooth 20 DP 0.375" Hex Bore, Steel Gear

#am-3537

$24.60

(In stock)

Specifications:

Tooth Count: 34
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.7"
Face Width: 0.375":
Material: 4140 Steel
Bore: 0.375" Hex

38T 20DP 0.375" Hex Bore, Steel Gear

#am-3538

$26.14

(In stock)

Specifications:

Tooth Count: 38
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.9"
Face Width: 0.375"
Material: 4140 Steel
Bore: 0.375" Hex

36T 20 DP Steel 4 Tooth Dog Gear

#am-3539

$27.68

(In stock)

Specifications:

Tooth Count: 36
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 1.8"
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"

46T 20 DP Steel 4 Tooth Dog Gear

#am-3540

$33.83

(In stock)

Specifications:

Tooth Count: 46
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.25
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Weight: 0.24 Lbs

52T 20DP Steel 4 Tooth Dog Gear

#am-3541

$36.90

(In stock)

Specifications:

Tooth Count: 52
Diametral Pitch: 20
Pressure Angle: 14.5
Pitch Diameter: 2.6"
Face Width: 0.438"
Material: 4140 Steel
Dog Profile: 4 Tooth, 90 Degrees Opposed
Bearing Bore: 1.124"
Weight: 0.3 Lbs

Four Tooth Dog Gear (am-3568)

#am-3568

$46.13

(In stock)

The dog gear has 4 dogs on each face. This allows more material around the dog gear screw, increasing strength over previous designs. A robust 1/8" diameter shoulder screw replaces the previously used #4-40 screw. The dog gear material is AMPCOÂ® 18 Bronze. This material has similar properties to stainless steel (previously used), but has added lubricity for smooth shifting.

12T 32DP 5 mm Bore Steel Pinion Gear

#am-3657

$10.76

(In stock)

This 12 tooth pinion gear is designed to fit onto an AndyMark RedLine Motor (am-3775) and other motors with a 5 mm output shaft to interface with spur gearboxes such as the DeCIMate (am-3745), EVO Slim for RedLine and EVO Shifter for RedLine.

Specifications:

Bore: 5mm press fit
Weight: 0.014 Pounds
Material: 1117 Steel
Overall Length: 0.755 in.
Face Width: 0.625 in.
Tooth Count: 12
Pitch Diameter: 0.375 in.
Pressure Angle: 20
Diametral Pitch: 32

45T 32DP 20PA 0.375" Hex Bore Gear

#am-3694

$23.06

(In stock)

Specifications:

Tooth Count: 45
Diametral Pitch: 32
Pressure Angle: 20
Pitch Diameter: 1.406"
Material: 4140 Steel
Bore: 0.375 in. Hex
Weight: 0.115 Pounds

20T 05" Hex Bore Miter Gear

#am-3772

$33.83

(22 In stock)

Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a .500" hex bore, making it perfect for interfacing with many popular products in the competition robotics marketplace.

Specifications:

Material: 1045 Steel
Module: 1.25
Tooth Count: 20
Pressure Angle: 20
Pitch Diameter: 0.980 in
Mounting Distance: 0.910 in
Hub Depth: 0.350 in
Hub Diameter: 0.870 in
Bore: 0.50 in Hex
Weight: 0.056 Pounds

20T, 8 mm Bore with 2 mm Keyway Miter Gear

#am-3776

$33.83

(In stock)

Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a 8mm bore with a 2mm keyway, fitting perfectly on a CIM motor shaft.

Specifications:

Material: 1045 Steel
Module: 1.25
Tooth Count: 20
Pressure Angle: 20
Pitch Diameter: 0.980 in
Mounting Distance: 0.910 in
Hub Depth: 0.350 in
Hub Diameter: 0.870 in
Bore: 8 mm with 2 mm keyway
Weight: 0.078 Pounds