Close
Main Categories
    Filters
    Preferences
    Search

    NOCO Battery Charger 3 Bank Connectors: SB50 Connectors

    NOCO Genius Gen Series 5A 1 and 3 bank Battery Charger


    This charger is a must have tool for competition robotics teams and hobbyists using 12-volt lead-acid (flooded, gel, AGM) or lithium-ion batteries. NOCO chargers charge batteries to 100% specific gravity every charge, and are able to adjust current in the absorption and finish stages based on the battery's communication with the charger.

     


    There are up to 3 unique charging banks included in these chargers, meaning that you can charge up to three batteries at a time. Each bank has a capacity of 5 amps. This charger supplies a safe amperage level to charge 12V lead acid batteries quickly. The charger is engineered for occasions which need a charging system that may require the battery to be left on the charger for days at a time.



    We have installed your choice of SB50 and SB120 connectors on each of the charging circuits, which makes this charger ready for FRC robot batteries right out of the box. 


    Ensure that the batteries have had sufficient time to cool before charging. Neglecting this step may be detrimental to the longevity and overall performance of the batteries.
     

      MFR Part #: am-4968_3
      $450.00
      4 in stock

      Features

      • Dependable, rugged construction and waterproof
      • Independent outputs and fully automatic
      • Battery repair mode
      • Approved and meets ISO 8846 Marine standards
      • LED lights indicate Each Batteries state of charge
      • Reverse polarity protected and no installation restrictions
      • Ignition protected (US Coast Guard 33 CFR 183.410)
      • FCC 15 Parts A and B Interference Compliant

       

      Specifications

      • Cable Length: 6 ft. (all cables)
      • Fuses Used: 7.5 MINI Blade Fuse
      • Input: 120-240 VAC
      Write your own review
      • Product can be reviewed only after purchasing it
      • Only registered users can write reviews
      *
      *
      • Bad
      • Excellent

      Features

      • Dependable, rugged construction and waterproof
      • Independent outputs and fully automatic
      • Battery repair mode
      • Approved and meets ISO 8846 Marine standards
      • LED lights indicate Each Batteries state of charge
      • Reverse polarity protected and no installation restrictions
      • Ignition protected (US Coast Guard 33 CFR 183.410)
      • FCC 15 Parts A and B Interference Compliant

       

      Specifications

      • Cable Length: 6 ft. (all cables)
      • Fuses Used: 7.5 MINI Blade Fuse
      • Input: 120-240 VAC
      Customers who bought this item also bought

      1/4-20 x 1 in. Thread Forming Screw Hex Washer Head

      #am-1182
      $1.25
      ( 178 In stock)

      This item can only be purchased in multiples of 10

       

      This 1/4-20 screw is 1 in. long. This screw is thread forming which means it creates a secure connection with the parts it attaches to without the use of a nut.

       

      Specifications

      • Drive: 3/8 in. Unslotted External Hex
      • Finish: Zinc
      • Head: Hex Washer
      • Length: 1 in.
      • Material: Steel
      • Thread: 1/4 -20
      • weight: 0.016 lbs

      2" Compliant Wheel, 3/8 inch Hex, 35 Durometer Green

      #am-3571_green
      $8.00 $10.42
      (In stock)

      Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

       

      The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

       

      Compliant Wheel Sizing

       

      Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

       

       

      Specifications

       

      • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
      • Diameter: 2 in.
      • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
      • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
      • Material: TPU
      • Maximum RPM: 6000 - 9000
      • Weight: 0.035 lb.
      • Width: 0.5 in.

       

      Documents

      Layout Print(s)

      am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

      am-3462 2IN 500Hex Compliant Wheel REV3.PDF

      am-3572 2IN 8mm Compliant Wheel REV4.PDF

      CAD File(s)

      am-3571 2IN 375Hex Compliant Wheel REV2.STEP

      am-3572 2IN 8mm Compliant Wheel REV2.STEP

      am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

      Additional File(s)

      2 inch Compliant Wheel Expansion.pdf

      Don't see what you need?

      Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

      #am-2986
      $9.00 $10.42
      ( 283 In stock)

      This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

      This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


      Specifications:

      • Inside diameter: 0.500-0.502 inch hex bore
      • Outside diameter: 1.125 inch
      • Flange thickness: 0.062 inch
      • Overall thickness: 0.312 inch
      • Weight: 0.05 pound

      6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

      #am-0805
      $5.50
      ( 110 In stock)

      This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

       

      Specifications

      • Gauge: 06 AWG
      • Hole Size For Stud: 0.25 in.
      • Material: Copper
      • Overall Length: 2.03 in.
      • Tongue Width: 0.48 in.
      • Weight: 0.01 lbs
      • Wire Strip Length: 1.18 in.

      1/2 in. Hex Collar Clamps, Silver Thin (0.25in) - 1 part

      #am-1635
      $6.95
      ( 70 In stock)

      These custom designed collar clamps have been designed specifically with FIRST Robotics Competition teams in mind. The one-piece collar clamp is a nice fractional 1/2 in. width to make shaft stackups easy. The clamping force is provided by a 10-32 socket head screw, which is bigger than most used in the competition marketplace.  This provides a high-strength clamping solution that shouldn't strip out when you need it most. You can even replace the 10-32 screw if it becomes lost with the screws historically used in the AM14U family of chassis. These thoughtfully designed collar clamps also have small bosses on each side. This allows these collar clamps to be installed directly adjacent to an FR8ZZ Round or FR8ZZ Hex bearing without rubbing on the outer races for smooth operation.

      2.25 inch Compliant Wheel, 1/2 inch Hex, 50A Durometer, Blue

      #am-3949_blue
      $10.00 $10.42
      ( 55 In stock)

      Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



      Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.

       

      Specifications

       

      • Bore: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
      • Core Material: Polycarbonate
      • Diameter: 2.25 in.
      • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
      • Tread Material: TPU
      • Weight: 0.08 lbs
      • Width: 1 in.

       

      Documents

      Layout Print(s)

      am-3949 2.25IN 500Hex HD Compliant Wheel REV3.PDF

      am-3950 2.25IN 375Hex HD Compliant Wheel REV3.PDF

      am-4536 2.25in HD 5mm Hex Molded Compliant Wheel.PDF

      CAD File(s)

      am-3949 2.25IN 500Hex HD Compliant Wheel.STEP

      am-3950 2.25IN 375Hex HD Compliant Wheel.STEP

      am-4536 2IN OverMolded 5mm Hex Compliant Wheel.STEP

      2.25 inch Compliant Wheel, 1/2 inch Hex, 60A Durometer, Black

      #am-3949_black
      $10.00 $10.42
      ( 26 In stock)

      Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



      Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM.

       

      Specifications

      • Bore: 0.375 in. Hex, 0.50 in. Hex, 5 mm Hex
      • Core Material: Polycarbonate
      • Diameter: 2.25 in.
      • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
      • Tread Material: TPU
      • Weight: 0.08 lbs
      • Width: 1 in.

       

      Documents

      Layout Print(s)

      am-3949 2.25IN 500Hex HD Compliant Wheel REV3.PDF

      am-3950 2.25IN 375Hex HD Compliant Wheel REV3.PDF

      am-4536 2.25in HD 5mm Hex Molded Compliant Wheel.PDF

      CAD File(s)

      am-3949 2.25IN 500Hex HD Compliant Wheel.STEP

      am-3950 2.25IN 375Hex HD Compliant Wheel.STEP

      am-4536 2IN OverMolded 5mm Hex Compliant Wheel.STEP

      #10-32 x 0.625" SHCS - Min 25

      #am-1120
      $0.47 $0.53
      (In stock)

      Specifications:

       

      • Material: Steel
      • Coating: Zinc plated
      • Thread: 10-32
      • Length: 5/8 inch
      • Head: Socket Head Cap Screw
      • Yellow Nylon Thread Lock Patch