Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    2 x 1x 0.063 Aluminum Box Extrusion, 3ft

    These aluminum box extrusions are robust and lightweight solutions for custom robot frames, superstructures and mechanism construction. Made to all of your favorite English sizes, the classic 2x1 thin wall tubing is now joined by its thicker-walled counterpart. We have also introduced two thicknesses of 1x1 sizes that teams know and love to build their medium-sized mechanisms. 



    For smaller mechanisms, we recommend using our 5/8 square box tube that is also compatible with the S3 line of brackets and gussets.

     

    Available Sizes:

    • 2 x 1 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • 2 x 1 x 1/8 in. (0.125 in.) 6061-T6 alloy
    • 1 x 1 x 1/16 in. (0.063 in.)6061-T6 alloy
    • 1 x 1 x 1/8 in. (0.125 in.)6061-T6 alloy
    • 5/8 x 5/8 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • All lengths are (+/- 1in)

    Be sure to all check out our Gussets as they work wonderfully with all of these wonderful extrusions.

    # Pièce: am-3214-3
    $24.00
    Disponibilité: 8 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    #10-32 x 0.625" SHCS - Min 25

    #am-1120
    $0.47
    (En stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 5/8 inch
    • Head: Socket Head Cap Screw
    • Yellow Nylon Thread Lock Patch

    10-32 Nylock Nut

    #am-1042
    $0.08
    (En stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    WAGO 221 Series InLine Splicing Connector with Lever

    #am-4728
    $1.00
    (988 En stock)

    This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.

    1/2 in. ID Black Nylon Washer

    #am-1001
    $0.49
    (En stock)

    Nylon washer with a 1/2 in. inside diameter.

     

    This item can only be purchased in multiples of 10

     

     

    Specifications

    • Inside Diameter: 0.505 in.
    • Material: Nylon
    • Outside Diameter: 0.750 in.
    • Thickness: 0.062 in.

    2" Compliant Wheel, 3/8 inch Hex, 50 Durometer Blue

    #am-3571_blue
    $8.00
    (En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

     

    Bearing and Motor Mount Bracket

    #am-4244
    $14.00

    This simple bracket handles so many of your mounting needs! Mount motors or gearboxes anywhere and make axle supports with bearings - it's a do-it-all, put-it-anywhere bearing and motor mount bracket.

     

    Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to hold a standard 1.125 inch outside diameter bearing.

     

    Examples of motors with a 2 in. diameter bolt circle:

     

    • 2.5 in. CIM Motor
    • NEO Brushless Motor

     

    Examples of gearboxes with a 2 in. diameter bolt circle

     

    • PG Series Gearboxes
    • 57 Sport Gearbox
    • CIM Sport Gearbox
    • Falcon Sport Gearbox
    • DeCIMate Gearbox

     

    Specifications

     

    • Depth: 1 in.
    • Height: 2.679 in.
    • Length: 3.5 in.
    • Material: 5052 Aluminum
    • Thickness: 0.13 in.
    • Weight: 0.104 lbs

     

    Documents

     

    Layout Print(s)

    am-4244 1IN Pitch Bent Motor and Bearing Bracket REV2.PDF

     

    CAD File(s)

    am-4244 1IN Bent Bearing Side Mount Gusset.STEP