This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a PG71 motor shaft. Specification:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. Product Overview:
This external retaining ring is used to fit into a groove on a 3/4" shaft. External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore. Specification:
3/16" x 3/4" spring pin. Used in the WormBox gearbox. Specifications:
Specifications:
1/2 inch external retaining ring, used in the RAW Box. Specifications:
This gear can be used on the any of the PG Series Gearmotors, fitting on the 10mm output shaft. Specifications:
#25 Connecting Link (Master Link) Specifications:
#35 Connecting Link (Master Link) Specifications: