Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Brackets

    Brackets

    Voir comme Grille Lister
    Trier par
    Affichage par page

    432mm x 40mm Flat Bracket

    #76058
    $15.84
    (173 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 432mm
    • Hole pattern - 9
    • Step File

     

    End Piece Plate (2 pack)

    #76143-2
    $13.77
    (2601 En stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

     

    Motor Mount Clamp Kit

    #76141
    $15.15
    (1254 En stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Motor Mount Plate

    #76140
    $8.95
    (1021 En stock)

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

     

    Motor Mount Plate Leaf

    #76139
    $6.88
    (873 En stock)

    Robot Base Plate

    #74001
    $53.75
    (167 En stock)

    The Studica Robot Base Plate is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 288mm
    • Length - 336mm
    • Step File

    Servo Mount Flat Plate

    #76145
    $8.95
    (1337 En stock)

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Servo Mount Offset Plate

    #76146
    $9.64
    (1048 En stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    1-1 Motor Kit, 5mm Hex Shaft

    #76289
    $11.01
    (490 En stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    384mm x 40m Flat Bracket

    #76059
    $14.46
    (81 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 384mm
    • Hole Pattern - 8
    • Step File

     

    1-1 Motor Kit, 6mm D-Shaft

    #76290
    $11.01
    (486 En stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    336mm x 40mm Flat Bracket

    #76060
    $13.08
    (167 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 336mm
    • Hole Pattern - 7
    • Step File

     

     

    288mm x 40mm Flat Bracket (2 pack)

    #76061-2
    $18.73
    (820 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 288mm
    • Hole Pattern - 6
    • Step File

     

    Threaded Joiner Plate (6 pack)

    #76502-6
    $17.88
    (En stock)

    The Studica Threaded Joiner Plate can be used to join two different structure components together, such as U Channel and brackets.

     

    Specifications:

    • Length: 24mm
    • Width: 22mm
    • Height: 3mm
    • Holes: 10 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File

    240mm x 40mm Flat Bracket

    #76062
    $8.67
    (202 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 240mm
    • Hole Pattern - 5
    • Step File

     

    Threaded Pattern Plate (6 pack)

    #76503-6
    $17.88
    (En stock)

    The Studica Threaded Pattern Plate can be used to join two different structure components together.

     

    Specifications:

    • OD: 28mm
    • ID: 14mm
    • Thickness: 3mm
    • Holes: 8 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File

    192mm x 40mm Flat Bracket (2 pack)

    #76063-2
    $14.60
    (590 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 192mm
    • Hole Pattern - 4
    • Step File

     

    144mm x 40mm Flat Bracket (2 pack)

    #76064-2
    $12.39
    (2021 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 144mm
    • Hole Pattern - 3
    • Step File

     

    96mm x 40mm Flat Bracket (2 pack)

    #76065-2
    $9.08
    (1618 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 96mm
    • Step File

     

    192mm x 96mm Flat Bracket (2 pack)

    #76066-2
    $22.04
    (414 En stock)

    The Studica 192mm x 96mm Flat Bracket is a very strong  3mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 96mm
    • Length - 192mm
    • Step File

     

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $7.57
    (569 En stock)

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File