Fermer
Menu
toutes catégories
    (0) Produits
    Vous avez pas d'articles dans votre panier.
    (0) Soumission
    Vous avez pas d'articles dans votre panier.
    Menu
    Panier
    filtres
    préférences
    Rechercher
    Précédent1-1 Motor Kit - 6mm D-Shaft...
    SuivantThreaded Pattern Plate (6 p...

    Threaded Joiner Plate (6 pack)

    Soyez le premier a tester ce produit

    The Studica Threaded Joiner Plate can be used to join two different structure components together, such as U Channel and brackets.

     

    Specifications:

    • Length: 24mm
    • Width: 22mm
    • Height: 3mm
    • Holes: 10 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File
    # Pièce: 76502-6
    $18,04
    En stock

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent

    A également acheté

    Photo de 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6,93
    ( 353 En stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    #45423
    $22,23
    ( 37 En stock)

    The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Enhanced Wheel Hub Kit

    Enhanced Wheel D-Shaft Hub Kit

    #76291
    $9,95 $20,82
    ( 970 En stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File
    Photo de 48mm Low Profile U-Channel

    48mm Low Profile U-Channel

    #76033
    $3,46
    ( 486 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

    Photo de 6mm D-Shaft Hub (4 pack)

    6mm D-Shaft Hub (4 pack)

    #76284-4
    $13,88
    ( 1564 En stock)

    The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.

    Specifications:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File
    Photo de 48mm U-Channel (2 pack)

    48mm U-Channel (2 pack)

    #76018-2
    $8,32
    ( 376 En stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

     

     

     

    Photo de 432mm Low Profile U-Channel

    432mm Low Profile U-Channel

    #76025
    $18,04
    ( 562 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 432mm
    • Hole pattern - 9
    • Step File

     

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    #45424
    $17,25
    ( 35 En stock)

    These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Photo de 1/2" Churro, 11.25 in. (am-3398)

    1/2" Churro, 11.25 in. (am-3398)

    #am-3398
    $8,00
    (En stock)

    Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

    The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

    Specifications:

    • Material: 6005A Aluminum
    • Inside diameter: 0.231 in.
    • Outside width: 0.495 in. Hex, across flats
    • Length: Selectable Above
    • Weight: 0.16 lbs/ft
    Photo de Motor Mount Plate

    Motor Mount Plate

    #76140
    $9,02
    ( 1404 En stock)

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

     

    Les clients ayant acheté cet article ont également acheté
    Photo de 6mm D Shape Collar Clamp

    6mm D Shape Collar Clamp

    #76320
    $6,93
    ( 353 En stock)

    May be used with 6mm D-Shape Shaft to secure wheels in their position.
     

    Specifications:

    • Φ20.0mm*8.0mm thick
    • 1*M3 thread for M3 SHCS on the clamp side
    • Φ6.0mm D hole
    • AL6061-T6
    • Step File

     

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    #45423
    $22,23
    ( 37 En stock)

    The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Enhanced Wheel Hub Kit

    Enhanced Wheel D-Shaft Hub Kit

    #76291
    $9,95 $20,82
    ( 970 En stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File
    Photo de 48mm Low Profile U-Channel

    48mm Low Profile U-Channel

    #76033
    $3,46
    ( 486 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

    Photo de 6mm D-Shaft Hub (4 pack)

    6mm D-Shaft Hub (4 pack)

    #76284-4
    $13,88
    ( 1564 En stock)

    The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.

    Specifications:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File
    Photo de 48mm U-Channel (2 pack)

    48mm U-Channel (2 pack)

    #76018-2
    $8,32
    ( 376 En stock)

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

     

     

     

    Photo de 432mm Low Profile U-Channel

    432mm Low Profile U-Channel

    #76025
    $18,04
    ( 562 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 432mm
    • Hole pattern - 9
    • Step File

     

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    #45424
    $17,25
    ( 35 En stock)

    These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Produits connexes
    Photo de 96mm x 40mm Flat Bracket (2 pack)

    96mm x 40mm Flat Bracket (2 pack)

    #76065-2
    $9,15
    ( 283 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 96mm
    • Step File

     

    Photo de 192mm x 96mm Flat Bracket (2 pack)

    192mm x 96mm Flat Bracket (2 pack)

    #76066-2
    $22,21
    ( 1640 En stock)

    The Studica 192mm x 96mm Flat Bracket is a very strong  3mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 96mm
    • Length - 192mm
    • Step File

     

    Photo de 120 Degree Bracket (2 pack)

    120 Degree Bracket (2 pack)

    #76080-2
    $18,04
    ( 1307 En stock)

    The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

     

    Photo de 90 Degree Bracket (2 pack)

    90 Degree Bracket (2 pack)

    #76081-2
    $9,71
    ( 955 En stock)

    The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de 135 Degree Bracket (2 pack)

    135 Degree Bracket (2 pack)

    #76082-2
    $9,71
    ( 161 En stock)

    The 135 Degree Bracket is perfect for connecting two channels pieces at 45 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Used for intake systems, elevator systems, or structure where 45 degrees is required. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de 96mm Adjustable Flat Bracket (2 pack)

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $7,63
    ( 243 En stock)

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File
    Photo de T Bracket (2 pack)

    T Bracket (2 pack)

    #76084-2
    $13,88
    ( 688 En stock)

    The T Bracket is perfect for connecting two or three channels together. Each side is 48mm wide to fit on the U Channel, low profile channel or other brackets. The overall size is 144mm x 96mm

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    Photo de X Bracket (2 pack)

    X Bracket (2 pack)

    #76085-2
    $15,27
    ( 1275 En stock)

    The X Bracket is perfect for connecting four channels pieces together. Each of the 4 sections is 48mm wide and the overall dimmension is 144mm x 144mm.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de Inside U Bracket (2 pack)

    Inside U Bracket (2 pack)

    #76086-2
    $8,32
    ( 1177 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside U Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de L Bracket (2 pack)

    L Bracket (2 pack)

    #76087-2
    $8,32
    ( 1954 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the L Bracket is 48mm x 48mm and is used outside the U Channel or Low profile channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de Inside L Bracket (2 pack)

    Inside L Bracket (2 pack)

    #76089-2
    $8,32
    ( 432 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File
    Photo de End Piece Plate (2 pack)

    End Piece Plate (2 pack)

    #76143-2
    $13,88
    ( 4035 En stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

     

    Photo de Threaded Pattern Plate (6 pack)

    Threaded Pattern Plate (6 pack)

    #76503-6
    $18,04
    (En stock)

    The Studica Threaded Pattern Plate can be used to join two different structure components together.

     

    Specifications:

    • OD: 28mm
    • ID: 14mm
    • Thickness: 3mm
    • Holes: 8 x M3 x 3mm Tap Through
    • Material: 6061-T6 Aluminum, Blue Anodized
    • Step File
    Informations
    Service Clients
    Mon compte
    Informations de contact
    Droit d'auteur et copie; 2024 Studica Limited. Tous les droits sont réservés.