CIM-Sim (am-0932)

Soyez le premier a tester ce produit

This is a lightweight gearbox designed for having two 500-series motors, with the output shaft being similar to that of a 2.5 in. CIM Motor. It is also designed to have an encoder mounted to it, no need to drill more holes! Please note that this gearbox ships as an un-assembled kit of parts.

# Pièce: am-0932

$136.84

Disponibilité: En stock

Quantité:

Aperçu
Commentaires

All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

Specifications:

Weight: 0.55 pounds (without motor)
Input: 0.125" dia. shaft
Output: 8mm (0.313") dia. shaft, 2mm keyway
Reduction Ratio: 5:1
Max Output Torque: To be determined
Gear Material: Steel

Included Hardware:

One - Retaining Ring, 8mm id (am-0033)
Two - Motor Plate for CIM-Sim Gearbox (am-0926)
One - 60T 32DP 0.375" Hex Bore, Steel Gear (am-0927)
Two - 12T 32DP 0.125" Round Bore, Steel Gear (am-0928)
One - Output Shaft for CIM-Sim Gearbox (am-0930)
Two - Ball Bearing, 8MMx19MMx6MM Flanged (am-0931)
Four - 10-32 Nylock Nut - Bulk Qty (am-1042)
One - 2x2x10 mm Machine Key, steel (am-1121)
Four - 10-32 Self Clinching Flush Nut (am-1179)
One - 3/16 Thick Nylon Spacer (am-1181)
Four - 10-32 x 1-1/4" Self Clinching Stud (am-1239)
Four - M3-0.5 x 6mm SHCS (am-1254)
Four - 11/16 Thick Nylon Spacer (am-1255)

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

Weight: 0.55 pounds (without motor)
Input: 0.125" dia. shaft
Output: 8mm (0.313") dia. shaft, 2mm keyway
Reduction Ratio: 5:1
Max Output Torque: To be determined
Gear Material: Steel

Included Hardware:

One - Retaining Ring, 8mm id (am-0033)
Two - Motor Plate for CIM-Sim Gearbox (am-0926)
One - 60T 32DP 0.375" Hex Bore, Steel Gear (am-0927)
Two - 12T 32DP 0.125" Round Bore, Steel Gear (am-0928)
One - Output Shaft for CIM-Sim Gearbox (am-0930)
Two - Ball Bearing, 8MMx19MMx6MM Flanged (am-0931)
Four - 10-32 Nylock Nut - Bulk Qty (am-1042)
One - 2x2x10 mm Machine Key, steel (am-1121)
Four - 10-32 Self Clinching Flush Nut (am-1179)
One - 3/16 Thick Nylon Spacer (am-1181)
Four - 10-32 x 1-1/4" Self Clinching Stud (am-1239)
Four - M3-0.5 x 6mm SHCS (am-1254)
Four - 11/16 Thick Nylon Spacer (am-1255)