Panier

filtres

Menu personnel

préférences

Rechercher

PrécédentCIMple Box Housing (am-0739...

SuivantCIM-Sim (am-0932)

CIMple Box, Single Stage Gearbox

Soyez le premier a tester ce produit

All AndyMark gearboxes require grease for proper operation and long life. We suggest using our red tacky grease, am-2768. We also encourage that the user powers the gearbox continuously for 30 minutes without grease to allow the gear teeth to wear in. While we do design with short run times in mind, this 'run in' period for smooth gearbox operation, is recommended. Once this is completed, thoroughly grease the gear teeth periodically to ensure smooth operation.

Product Overview:
This gearbox is shipped in kit form, unassembled. The CIM Motors are NOT INCLUDED with this gearbox.

CIMple Box accepts two (or one) 2.5 inch CIM Motors. Hardware is included for attaching two of these motors.

Specifications:

Overall Ratio: 4.67:1
Gear material: 4140 steel
Gear type: spur gears, 20 dp, 14.5 degree pressure angle
Gearbox housing material: Nylon 6/6 with long fiberglass fill
Output shaft: 1/2 inch diameter, with 1/8" keyway, 4140 steel
Weight: 1.40 pounds
Input Gear: CIM Gear, 12 tooth, 0.315 inch bore w/ 2mm keyway (2)
Output Gear: 56 tooth, 1/2 inch hex bore

Included Hardware:

High-strength plastic housing
Shaft Plate (1/8" thick, 5052 aluminum)
56 tooth output gear
12 tooth CIM gear (2)
2x2x10 mm machine key (2)
1/8 x/1/8 x 0.7 inch machine key
#10-32 x 5/8 long SHCS (8)
#10-32 Nylock nut (4)
5/16" retaining ring (2)
1/4-20 x 1/2" BHCS
1/4" washer

Additional Encoder: An optional Encoder can be purchased and added to this CIMple Box.

# Pièce: am-0734

$90.71

Disponibilité: En stock

Quantité:

Aperçu
Commentaires

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "0"

#AM-2680

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "5"

#AM-2685

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "4"

#AM-2684

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4in tall, Qty 4 - "1"

#AM-2681

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Blue Bumper Material, 161in x 19.5in

#am-2676

$30.00

(En stock)

BLUE Cordura nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

Additional Information:

We also have stick-on numbers available (not included with material).

Specifications

Color: Blue
Denier: 1000
Length: 161 in.
Material: Nylon
Width: 19.5 in.

Red Bumper Material, 161in x 19.5in

#am-2675

$30.00

(En stock)

RED Cordura nylon bumper fabric material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

Additional Information:

We also have stick-on numbers available (not included with the material).

Specifications

Color: Red
Denier: 1000
Length: 161 in.
Material: Nylon
Width: 19.5 in.

Les clients ayant acheté cet article ont également acheté

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "0"

#AM-2680

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "5"

#AM-2685

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4 inch tall, Qty 4 - "4"

#AM-2684

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Vinyl Stick-on Number, White, 4in tall, Qty 4 - "1"

#AM-2681

$9.00

(En stock)

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

Quantity: 4
Material: White stick-on plastic
Height: 4 inches
Width: 2.6 inches
Line width: 0.8 inch
Weight: 0.004 pounds

Usage (for best application):

Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
Place numbers in position on bumper material as desired with pressure.
Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
Place under a static load for 5 minutes.

Blue Bumper Material, 161in x 19.5in

#am-2676

$30.00

(En stock)

We also have stick-on numbers available (not included with material).

Specifications

Color: Blue
Denier: 1000
Length: 161 in.
Material: Nylon
Width: 19.5 in.

Red Bumper Material, 161in x 19.5in

#am-2675

$30.00

(En stock)

Additional Information:

We also have stick-on numbers available (not included with the material).

Specifications

Color: Red
Denier: 1000
Length: 161 in.
Material: Nylon
Width: 19.5 in.