iCrimp Cable Lug Crimping Tool for Heavy Duty Wire Lugs, Battery Terminal, AWG 8-1/0

IWS-2820M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors.

Purpose: IWS-2412M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors.

iCrimp Ferrule Crimping Tool Kit, AWG 23-10 Self-adjustable Ratchet Ferrule Crimper Plier c/w 770End Sleeve Ferrules Connector Terminals

These plugs are intended to indicate batteries that are charged. They fit into an Anderson Power Products (APP) SB-50B Connector.

Usage:Batteries not fully charged should not have a plug inserted into their APP connector. Instead they should be put on charge.

Specifications

• Material: Plastic
• Size: 2.05 in. 1.48 in. 0.24 in.
• Weight: 0.014 lbs

Tip-to-tip length is approximately 12.6 inches. Want it longer or shorter? We offer this cable in custom lengths! Both end connectors are crimped with a 6-ton pneumatic crimping tool. One end has connections to attach to the battery and the other has an SB50 Anderson Connector. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Which do you prefer a stiff cable or a flexible cable? No matter your choice we have the best option in either camp. PVC insulated cables create a stiff wire route maintaining shape for repeatable connections. EPDM jacketed cables cand bend and twist to accommodate tight spaces and small places.

Specifications

• Connector : SB50, 1/4 in. Ring Terminal
• Gauge: 6
• Insulation: PVC or EPDM
• Operating Temperature: 257°F to -59°F
• Stranding: 263 inside EPDM Jacketed Wire
• Voltage: 60V Max
• Wire Type: Stranded

This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the PRO-CRIMP Crimp Tool (am-3326).

Specifications

• Gauge: 06 AWG
• Hole Size For Stud: 0.25 in.
• Material: Copper
• Overall Length: 2.03 in.
• Tongue Width: 0.48 in.
• Weight: 0.01 lbs
• Wire Strip Length: 1.18 in.

The MK ES17-12, 12 Volt, 18 amp-hour sealed lead acid battery with nut and bolt connector has proven to be a trustworthy power source for many FIRST Robotics Competition robots. 

The batteries will be packed within a 7"x7"x7" box (aka: interior box). A 3/4" layer of closed-cell foam will be packed around the interior box, within a 9"x9"x9" box. The entire weight of this double box packing assembly will be approximately 29 pounds.

Two (2) batteries are shipped within one box for this price.

This is a product created by eStop Robotics. The genius of this design is the molded piece that interfaces with features in the 12 volt sealed battery used in competition robotics. The Battery Base molded plastic piece interfaces with a robot battery, while the fastening strap holds the battery onto the Battery Base. This provides a secure method of mounting a battery to a mobile robot base.

Our Robot Signal Light is designed to work with the robo-RIO's RSL port to provide a quick visual indicator of robot status. This is not the 855PB-B12ME522 light specified by R70 of the 2017 FIRST Robotics Competition manual, but it does provide similar functionality.

We're offering this product so teams can use all the diagnostic features of the robo-RIO at an affordable price when legality and compactness isn't a priority. Our light housing is larger, and it is wired with two spade connectors. There is no polarity on the light housing, so it is not possible to wire backwards. 

To wire this light, we recommend our 2-wire cable (am-2133) and either soldering to the spade connections or using a female spade connector available separately.

Specifications:

• Weight: 0.1085 pounds without lead wires
• Height: 3.23 in. from top of dome to bottom of mounting stem
• Dome height: 2.09 in.
• Dome diameter: 2.24 in.
• Mounting stem diameter: 0.850 in.
• Mounting threads: M22x1.5, nut included