22 tooth, 25 series
Specifications:
#25 Connecting Link (Master Link) Specifications:
These connecting chain attachment links, also known as K-links, are perfect for securing components that need movement, to a chain. These versions were specifically designed by AndyMark to interface with common FRC and FTC products. The #35 chain version is designed for #10 hardware on a 1 on. hole spacing. The #25 chain version is designed for #6 hardware with 16 mm (5/8 in.) hole spacing. Both versions make it much easier to interface chain to elevator systems than ever before. They can also be used in conveyor systems to move items around inside your robot.
Layout Print(s)
am-4181_25 25 Chain Attachment Link.PDF
am-4181_35 35 Chain Attachment Link.PDF
CAD File(s)
am-4181_35 35 Chain Attachment Link.STEP
am-4181_25 25 Chain Attachment Link.STEP
This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Specifications:
#25 Roller Chain, 10 feet Product Overview:
Product Overview:
#25 Half Link. Also known as #25 Offset Link. Specifications:
This simple bracket handles so many of your mounting needs! Mount motors or gearboxes anywhere and make axle supports with bearings - it's a do-it-all, put-it-anywhere bearing and motor mount bracket.
Any motor or gearbox with a 2-inch diameter bolt circle can be mounted in this bracket. The center hole is sized to hold a standard 1.125 inch outside diameter bearing.
Examples of motors with a 2 in. diameter bolt circle:
Examples of gearboxes with a 2 in. diameter bolt circle
am-4244 1IN Pitch Bent Motor and Bearing Bracket REV2.PDF
am-4244 1IN Bent Bearing Side Mount Gusset.STEP
The easy way to change the length of your #25 chain. (Chain not included)