SMC Double Acting Single Rod 3/4 in. Bore Air Cylinder - 7 inch.

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

Specifications:

• Flange diameter: 1.654"
• Outside Diameter: 1.459"
• Pitch Diameter: 1.504"
• Width: 0.276"
• Bore: 0.50" Hex
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.0025 Pounds

This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

Specifications:

• Weight: pounds
• Length: Approximately 24 inches
• Connector Type: Anderson PowerPole PP45
• Gauge: 12 bonded

This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

Specifications:

• Manufacturer: Clippard
• Weight: 0.64 lbs
• Capacity: 574 ml (35 cu. inch)
• Ports: Two 1/4" od tube push-in fittings
• Maximum pressure: 125 psig
• Temperature rating: 35 to 100 F
• Length: 12.25"
• Diameter: 2.5" (@ main tank), 2.75" max

A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).

This bracket allows attachment of an air cylinder to extrusion that has a 1 in. wide dimension such as Peanut or 2x1 box tube

Specifications

• Cylinder Mounting Diameter: 0.623 in.
• Material: 5052 Aluminum

This cylinder, manufactured by phd, Inc, is robust and features a 3/4" diameter bore and a 4" stroke. The head, cap, and tube are all made of strong, lightweight aluminum. The rod is made from chrome-plated steel, and includes standard cushions to reduce end of travel impact.

We also provide a 2" and 6" stroke version of this same cylinder.

Specifications:

• Manufacturer: phd, Inc.
• Manufacturer part number: OCG13/4x4
• Type: Double Acting
• Bore: 3/4"
• Stroke: 4.0"
• Port Size: 1/8" NPT
• Weight: 0.42 lbs
• Rod End Thread: 1/4-28 (NF, fine pitch)

The Variable Degree Gusset is part of our S3 Ecosystem and works perfectly with the Tilerunner, S3 Tube, and all the other components in the S3 Ecosystem. The Variable Degree Gusset is ideal for when you want to connect two tubes together anywhere from in line to 90 degrees from each other.

Specifications:

• Material: 5052 Aluminum
• Weight: 0.042 Pounds
• Thickness: 2.29mm (0.09")
• Length: 80mm
• Width: 48mm
• Holes: 10 holes, 4mm in diameter on a 16mm grid

The Planetary Gearbox (PG) series of gearboxes and gearmotors feature robust planetary gearing inside paired with reliable motors. You asked for it, we delivered. This gearbox now features a 0.500 in. HEX output shaft to easily attach to 1/2 in. bore wheels, sprockets, and other motion products without the need for special adapters. The PG71 Gearmotor includes 775 motor with integrated quadrature encoder, simplifying feedback control.

Specifications

• Lubrication: Included with Gearbox
• Material: Steel
• Mounting Geometry: Four 10-32 threaded holes on a 2.00 in. Bolt Circle, 4 M4x0.7 Threaded Holes on a 1.378 in. Bolt Circle
• Weight: 1.98 lbs

Documents

CAD File(s)

am-3655 PG71 500 hex Motor Encoder.STEP

Don't see what you need?

See_all_our_guides,_drawings_and_CAD_files_here

Three (3) straight 1/8 NPT fittings (or right angle 1/8 NPT fittings) are NOT INCLUDED with this part, but are needed to connect tubing to this valve.

Specifications:

• Type: In-line, individual
• Size: 170mm x 67mm x 22mm
• Valve function: 5 Port-2 Position
• Port size: 1/8" NPT
• pilot air supply: Internal
• Cable length:
• Voltage: 12Vdc
• Weight: 0.72 lbs
• Pressure Range: 22 - 116 psi
• Max. pressure: 215 psi
• Max Response Time: 50ms
• Flow rating: 0.78 Cv

Game pad or joystick alone not your ideal driver setup? Try out the Button Board Deluxe. This controller doubles as a joystick and programmable buttons. When plugged into a Windows computer, the controller will show up as a Generic USB Controller and can be seen by the FIRST Robotics Competition Driver Station. The button Board Deluxe includes an attached USB cable for connecting to your driver station.

Features:

• Compatible with: PC,PS3,PS4,Xbox One
• Material: ABS
• Cable length: 70 in.
• Interface: USB
• Weight: 1.6 lbs