These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.
Pneumatic fitting with M5 threads and 1/4" push-in tubing port This fitting screws into a CKD single or double solenoid valve. Specifications:
This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the PRO-CRIMP Crimp Tool (am-3326).
This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard. This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.
Specifications:
A mounting bracket is available to order (am-2008), but is not included when ordering just this item.
Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).
Every millimeter counts in electrical installations: Building technology requires more and more functions integrated into ever smaller spaces. This connector accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allows you to connect different types of wires and enables bridging of wires with greatly differing cross sections.
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a PG71 motor shaft. Specification:
1/2 inch external retaining ring, used in the RAW Box. Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. Product Overview:
This external retaining ring is used to fit into a groove on a 3/4" shaft. External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore. Specification: